Stainless Steel Robotic Lawnmower Spikes with 12pcs Screws, Robotic Mower Traction Improved Assist Wheels for Wo-rx Landroid S/M Model Robotic Lawnmowers Review

Stainless Steel Robotic Lawnmower Spikes with 12pcs Screws – Product Review

Overview

This is not a lawn mower itself, but a set of stainless steel traction spikes and screws designed to upgrade the wheels on Worx Landroid S/M model robotic mowers. Intended for homeowners who own these specific robot mowers and struggle with wheel slip on slopes, wet grass, or loose soil, this accessory kit aims to improve grip and prevent the mower from getting stuck. With a single 1-star review and a price of $31.17, it’s a niche product that demands close scrutiny before purchase.

Who Should Buy This

• Worx Landroid S/M owners with moderate slopes – If your yard has inclines over 15 degrees and your robot mower frequently spins its wheels or stalls, these spikes might help.
• Homeowners with soft or uneven terrain – Sandy soil, damp clay, or bumpy lawns where standard wheels lose traction are the target use case.
• DIY tinkerers willing to experiment – This is an aftermarket add-on, not an OEM part. Only buy if you’re comfortable with installation and potential fitment issues.
• Budget-conscious users avoiding a mower upgrade – At $31, this is cheaper than buying a new robot mower with better traction, but only if it actually works.

Key Features Breakdown

• Stainless steel construction – The spikes are made from stainless steel, which resists rust and corrosion better than standard steel. This matters if you mow in damp conditions or store the mower outdoors. However, stainless is softer than hardened steel, so spikes may wear faster on concrete or rocky terrain.
• 12-piece screw set included – The kit comes with 12 screws, presumably enough for both wheels. Screw quality is critical here—cheap screws strip easily. With only one review, there’s no data on long-term durability.
• Designed for Worx Landroid S/M models – This is a very specific fit. Double-check your mower’s model number (e.g., WR140, WR147, WR150) before buying. It will not fit other brands or larger Landroid models.
• Traction improvement claim – The spikes attach to the wheel treads to bite into turf. In theory, this reduces slip on hills and wet grass. In practice, effectiveness depends on spike length, angle, and how well they stay attached.

Pros

1. Targeted solution for a common problem – Wheel slip on slopes is a frequent complaint among Worx Landroid owners. These spikes directly address that issue.
2. Rust-resistant material – Stainless steel is a smart choice for outdoor gear that sits in wet grass. You won’t see orange streaks on your wheels after a season.
3. Simple installation concept – Screwing spikes into wheel treads is straightforward, assuming the screws match the wheel material and the spikes don’t interfere with the mower’s chassis.
4. Low cost compared to alternatives – Replacing the entire mower or buying OEM traction wheels costs significantly more. $31 is a low-risk experiment if you’re handy.
5. Compact and non-permanent – You can remove the spikes if they don’t work or cause damage, unlike glued-on traction pads.
6. Lightweight – Adds negligible weight, so it won’t affect battery life or mower performance beyond traction.

Cons

1. Single 1-star review with no details – The rating is a massive red flag. Without knowing why the reviewer hated it (poor fit, screws stripped, spikes fell off, damaged wheels), you’re buying blind. This could be a defective product or user error, but the lack of positive feedback is concerning.
2. Potential for wheel damage – Drilling or screwing into plastic wheels can create stress points that lead to cracks, especially in cold weather. Once the wheels are compromised, replacement is expensive.
3. Unclear installation instructions – Aftermarket accessories often come with vague or poorly translated manuals. If the spikes require precise alignment or specific torque, you’re on your own.
4. Limited compatibility – Only works on Worx Landroid S/M models. If you upgrade to a larger mower or switch brands, these spikes are useless. No resale value.
5. May void warranty – Modifying the wheels could void Worx’s warranty. Check your mower’s terms before installing.

Bottom Line

I cannot recommend this product based on the available evidence. A single 1-star review with no explanation, combined with the risk of wheel damage and unclear fitment, makes this a gamble. If you own a Worx Landroid S/M and desperately need better traction, consider OEM traction wheels or a rubber tire upgrade kit from a reputable brand first. Only buy these spikes if you’re willing to accept that they might not work, could damage your mower, and have no customer feedback to guide you. At $31, it’s not a huge loss, but it’s also not a smart first step. Look for verified user photos and detailed reviews elsewhere before purchasing.

Frequently Asked Questions

Q: Will these spikes fit my Worx Landroid WR147? A: The product says it fits Worx Landroid S/M models, but the WR147 is a specific variant. Measure your wheel diameter and tread width against the spike dimensions (not listed in the product description). Without exact specs, assume it may not fit perfectly. Contact the seller for compatibility before buying.

Q: Do I need to drill holes in my wheels to install these spikes? A: It depends on the design. Some spike kits use self-tapping screws that bite into the rubber or plastic without pre-drilling. Others require pilot holes. The product description doesn’t specify, which is a red flag. If the screws are too long or too short, installation becomes difficult or damaging.

Q: Can I use these on a Worx Landroid M500 Plus? A: The M500 Plus is a newer model with different wheel design. Even though it’s an “S/M” size, the tread pattern and material may not accommodate these spikes. Check the wheel’s lug pattern and thickness. Without confirmed compatibility from other users, assume it won’t work until proven otherwise.