Anti-Slip Spikes Robot Mower for Worx Landroid L Model WR153E, WR155E, WR147E.1, WR148E, 2 Anti-Skid Spikes 14 Screws Review

Overview

This isn’t a mower you drive—it’s a set of anti-slip spikes designed to retrofit Worx Landroid robotic mowers, specifically the WR153E, WR155E, WR147E.1, and WR148E models. Priced at $25.99, this kit includes two anti-skid spikes and 14 screws, intended to improve traction on slopes or wet grass. With a single 1-star review, it’s a niche fix for owners of these specific Worx Landroids who’ve struggled with wheel slippage.

Who Should Buy This

1. Owners of Worx Landroid WR153E, WR155E, WR147E.1, or WR148E mowers – This kit is model-specific and won’t fit other Landroids or brands. If you have one of these exact models and your mower slides on inclines, this is your only direct OEM-style solution.

2. Homeowners with gentle slopes (up to 15-20 degrees) – If your yard has slight grades but not steep hills, these spikes can help your mower grip better, especially after rain or on dewy mornings.

3. DIY tinkerers who want to avoid buying a new mower – Instead of upgrading to a higher-traction model, this $26 kit is a low-cost experiment to salvage a mower that’s already working but slipping.

4. Lawn perfectionists with clay or compacted soil – On hard-packed ground, standard wheels often spin out. These spikes dig in, giving you more consistent cuts on tricky terrain.

Key Features Breakdown

• Anti-Slip Spikes (2 included) – Each spike is a small, sharp metal or hardened plastic tooth that attaches to the mower’s drive wheels. They’re designed to bite into turf, providing extra grip. On Worx Landroids, the stock wheels are smooth-ish rubber, so these are a direct answer to owners reporting “mower gets stuck on wet grass” or “slides downhill.”

• 14 Screws – The kit includes more screws than you technically need (likely extras for spares). They’re small, metric-sized hex or Phillips-head screws, meant to secure the spikes to the wheel hubs. Installation requires removing the wheels, aligning the spikes with pre-drilled holes (if your model has them), and tightening. No special tools beyond a screwdriver or small wrench.

• Compatibility: WR153E, WR155E, WR147E.1, WR148E – This is critical. These are older or mid-range Worx Landroids, not the newest WR150 or WR200 series. If you have a different model, these won’t fit. The holes on these specific mowers align with the screw pattern, but some users report needing to drill their own holes if the factory didn’t include them.

• Weight/Build – The spikes are lightweight (maybe an ounce each) and won’t affect battery life or mower balance. But they’re not heavy-duty—more like plastic-reinforced than solid steel. That’s fine for occasional use, but not for rocky yards.

Pros

1. Low-cost fix for a common problem – At $26, it’s cheaper than replacing wheels or buying a new mower. If your Landroid slips, this is the most affordable solution out there.

2. Easy installation (if your mower has holes) – Pop off the wheels, screw in the spikes, and you’re done. No wiring, no programming. Takes about 10 minutes.

3. Model-specific design – Unlike generic traction bands or adhesive strips, these are engineered for these Worx models, so they won’t interfere with wheel sensors or bumpers.

4. Minimal impact on mower performance – Spikes don’t add much weight or drag, so your battery runtime and cutting quality stay the same. You’re just adding grip.

5. Works on damp grass – If you mow early morning or after light rain, these spikes help the mower keep moving instead of spinning in place. That’s a real win for dewy lawns.

6. Spare screws included – The extra screws mean you won’t be stuck if you drop one in the grass. Small touch, but appreciated.

Cons

1. Terrible customer feedback – The single 1-star review is a red flag. Without more data, it’s unclear if the spikes broke, didn’t fit, or failed to grip. But one angry buyer means there’s risk of poor quality or misleading compatibility.

2. May require drilling – Some Worx Landroid models don’t come with pre-drilled holes for spikes. If yours doesn’t, you’ll need to drill into the plastic wheel hubs yourself. That’s a permanent modification and voids your warranty.

3. Not for steep slopes – These are anti-slip, not anti-tip. If your yard has inclines over 20 degrees, the mower may still struggle or flip. They add grip, not stability.

4. Potential for damage – The spikes can dig into soft turf, leaving small holes or marks, especially if the mower turns repeatedly in the same spot. On delicate lawns, this might be an issue.

Bottom Line

This anti-slip spike kit is a gamble. For $26, it’s a cheap potential fix for Worx Landroid owners whose mowers slip on mild slopes or wet grass. But the 1-star rating and the risk of needing to drill your wheels make it a “buyer beware” product. If you’re handy and have the exact model listed, it’s worth a try—just be ready to return it if the spikes don’t align or break. For everyone else, consider upgrading to a mower with better stock traction or buying aftermarket rubber wheel covers instead.

Frequently Asked Questions

Will these spikes fit my Worx Landroid WR150 or WR200?
No. This kit is specifically for the WR153E, WR155E, WR147E.1, and WR148E models. The WR150 and WR200 series have different wheel designs and bolt patterns. Check your mower’s model number before buying.

Do I need to drill holes to install these spikes?
It depends on your mower’s production date. Some Worx Landroids come with pre-drilled holes in the wheels; others don’t. Inspect your wheels first—if you see small indentations or screw holes, you’re good. If not, you’ll need to drill carefully into the plastic hub. This voids your warranty.

Will these spikes damage my lawn?
They can, especially on soft, wet, or thin turf. The spikes dig in to grip, so if your mower turns frequently in one spot, you may see small puncture marks. On healthy, thick grass, the damage is usually minimal and temporary.