2Pcs Stainless Steel Robotic Lawnmower Spike with 12pcs Screws, 225mm Lawnmower Spike for Wo-rx Landroid L Model Robots Lawn Mower WR153E, WR155E, WR147E.1, WR148E Review

Overview

These 225mm stainless steel robotic lawnmower blades are a dedicated replacement set designed specifically for Worx Landroid L-series robots, including models WR153E, WR155E, WR147E.1, and WR148E. They come as a two-pack with 12 mounting screws, making them a straightforward drop-in upgrade for owners who want to restore cutting performance or keep a spare set on hand. This is not a universal blade—it’s a precision-fit component for a specific family of robotic mowers.

Who Should Buy This

Worx Landroid L-Series Owners Who Need a Direct Replacement – If your original blades have dulled after a season or two of mowing, this set is the obvious choice. It’s designed to match the factory specs, so you won’t have to modify anything.

Homeowners with Medium-to-Large Lawns (Up to 0.5 Acres) – The L-series robots handle sizable yards, and these blades are built to handle the workload. If you’re mowing daily or every other day, having a spare set ready saves downtime.

DIYers Who Prefer Stainless Steel – Stainless resists rust better than standard steel, especially if you live in a humid climate or mow damp grass. If you’ve had issues with corrosion on previous blades, this is a worthwhile upgrade.

Budget-Conscious Owners Who Buy in Bulk – At $37.99 for two blades plus screws, the per-blade cost is reasonable. It’s cheaper than buying individual OEM replacements from Worx, and you get the hardware included.

Key Features Breakdown

Stainless Steel Construction – Unlike standard carbon steel blades that can rust after repeated wet cuts, stainless steel holds up better against moisture. This is genuinely useful if your robot lives outside or you mow early-morning dew. The trade-off is that stainless can be slightly softer than hardened steel, but for a robotic mower that only trims the top of grass, it’s more than adequate.

225mm Length (8.86 inches) – This is the exact length required for the L-series cutting disc. Using a longer blade would cause clearance issues inside the mower deck, while a shorter blade would leave uncut strips. The 225mm spec ensures full coverage of the 8-inch cutting path without overhang.

12 Screws Included – The screws are often overlooked, but they’re critical. Worx uses a specific thread pitch and head shape; generic screws can strip or loosen during operation. Having 12 new screws per two-blade set means you can replace everything at once, which is smart practice since old screws can corrode or wear out.

Compatibility with WR153E, WR155E, WR147E.1, WR148E – This covers the entire L-series lineup from the past few years. If you own one of these models, the blades will fit without modification. If you own a different Worx model (like the M-series or S-series), double-check the length—these won’t work.

Two Blades per Pack – Most robotic mowers use a single blade on a spinning disc, but having a backup means you can swap immediately when one dulls. For owners who mow daily, blade life is typically 2–4 months, so a two-pack covers roughly half a season.

Pros

• Rust Resistant – The stainless steel material genuinely holds up better than the stock blades if you mow wet grass or store the robot outdoors.
• Precise Fit – No drilling, filing, or adapter rings needed. They drop right onto the L-series spindle and align with the screw holes perfectly.
• Includes Quality Screws – The included screws are the correct length and thread pattern for Worx robots. You won’t have to reuse old, corroded hardware.
• Good Value per Blade – At roughly $19 per blade with screws, it’s cheaper than buying two OEM replacements separately.
• Easy Installation – Requires only a Phillips screwdriver and about 10 minutes. No special tools or mechanical skill needed.
• Consistent Cut Quality – The edges are sharp out of the box, and the 225mm length maintains the factory cutting width. No uneven trimming or missed spots.

Cons

• Not Compatible with Other Brands – These blades are strictly for Worx Landroid L-series. They won’t fit Husqvarna, Robomow, or other brands. Make sure you have the right model before ordering.
• Stainless Steel Is Softer – Stainless can dull faster on sandy or gritty soil compared to hardened steel. If your lawn has a lot of dirt or debris, you may need to replace them more often.
• Limited Reviews – With only 4 ratings on the product page, it’s hard to gauge long-term durability. Early impressions are positive, but there’s no track record of 6+ months of daily use.
• No Carrying Case or Storage Bag – The blades come in a basic plastic bag. If you want to store the spare blade safely, you’ll need to provide your own container.

Bottom Line

If you own a Worx Landroid L-series robot and your original blades are past their prime, this stainless steel replacement set is a solid, cost-effective choice. The rust resistance is a genuine advantage for anyone mowing damp grass, and the included screws eliminate the headache of hunting for the right hardware. It’s not a performance upgrade—it’s a reliable, direct-fit replacement that does exactly what it’s supposed to. For $37.99, you get two blades and peace of mind that your robot will cut cleanly for another season. I’d recommend buying this over generic “universal” blades that require modification. Just confirm your model number (WR153E, WR155E, WR147E.1, or WR148E) before checkout.

Frequently Asked Questions

Q: How often should I replace these blades on my Worx Landroid?
A: For a robot mowing daily, expect 2–4 months of usable sharpness depending on grass type and soil conditions. If you notice the robot leaving uncut patches or the grass looks torn rather than cleanly sliced, it’s time to swap. The two-pack gives you one immediate replacement and one spare.

Q: Will these fit my Worx Landroid M-series (like WR130E) or S-series?
A: No. These are 225mm blades designed specifically for the L-series (WR153E, WR155E, WR147E.1, WR148E). M-series and S-series models use a different blade length and mounting pattern. Check your robot’s manual or measure your current blade before ordering.

Q: Are the screws included actually the right size for my Worx robot?
A: Yes. The 12 screws match the factory thread pitch and head design used on L-series models. They’re a direct replacement for the original screws. Using generic hardware from a hardware store often leads to stripped threads or loose blades during operation, so these are a welcome inclusion.