24pack WG794 WA0190 Replacement Robotic Lawn Mower Cutting Blade for Worx Landroid Robotic Mower. Review

Overview

The 24pack WG794 WA0190 Replacement Robotic Lawn Mower Cutting Blade set is an aftermarket blade kit designed specifically for the Worx Landroid series of robotic mowers. Priced at $14.99 for a 24-pack, this is a budget-friendly consumable for homeowners who want to keep their Landroid cutting clean without overpaying for OEM replacements. It’s best for Worx Landroid owners who mow regularly and need a steady supply of sharp blades to maintain performance.

Who Should Buy This

1. Worx Landroid owners with medium-to-large lawns (up to 1/2 acre). If your robot mows daily or every other day, you’ll chew through blades fast. This 24-pack gives you enough to swap blades monthly for two years, saving you multiple trips to the store.

2. Homeowners who want to stretch their budget. At about $0.62 per blade, this kit is significantly cheaper than buying Worx-branded replacements individually. If you’re not picky about brand names and just want sharp steel that fits, this is a solid value.

3. DIYers who don’t mind minor fitment adjustments. Some users report the center hole is slightly tighter than OEM blades. If you’re comfortable with a quick file or reamer to open the hole a hair, these work fine. If you demand a perfect drop-in fit, stick with genuine Worx blades.

4. People with mixed grass types (fescue, Bermuda, or ryegrass). These blades are sharp enough for standard turf grasses, but they’re not designed for super thick or wet grass. If your lawn is mostly fine-bladed grass and you mow often, you’ll get good results.

Key Features Breakdown

24 blades per pack – This is the main selling point. With 24 blades, you can replace all three blades on most Worx Landroid models (like the M, S, and L series) eight times. That’s about two years of mowing for the average user, assuming monthly swaps.

Compatible with Worx Landroid models – Specifically designed for the WG794 (the blade mount part) and WA0190 (the blade itself). This covers the majority of Worx robotic mowers from 2016 onward. Always double-check your model number, but this is a broad fit.

Stainless steel construction – The blades are made from stainless steel, which resists rust better than plain carbon steel. This matters because robot mowers sit outside in dew, rain, and sprinkler overspray. Rusty blades dull faster and can leave ragged cuts.

Star-shaped center hole – The blades have a six-point star cutout that matches the Worx blade mount. This ensures they lock onto the drive pins and don’t spin loose during operation. Some users note the hole is slightly undersized, but it still engages the pins securely once pressed on.

Lightweight design – Each blade weighs just a few grams. Lighter blades reduce strain on the mower’s motor and battery, which can extend run time slightly. Not a game-changer, but it helps.

Pros

• Exceptional value for the quantity. $14.99 for 24 blades is hard to beat. Comparable OEM Worx 6-packs often cost $12–$15, so you’re getting four times as many for the same price.
• Good sharpness out of the pack. Most users report these cut cleanly on dry grass without tearing. They’re not razor-sharp, but they’re consistent with OEM performance.
• Rust-resistant stainless steel. Unlike cheap carbon steel blades that spot with rust after a few weeks, these hold up well in damp conditions.
• Universal fit for most Worx Landroid models. If you own a popular Worx robot mower, these almost certainly work. No need to hunt for a specific SKU.
• Easy to install. The star-shaped hole aligns with the mower’s blade mount. Pop off the old blade, push on the new one, and you’re done. No tools required beyond a screwdriver to remove the retaining pin.
• Great for high-frequency mowing. If your robot runs daily, you’ll burn through blades fast. This pack keeps you stocked without constant reordering.

Cons

• Center hole can be too tight. A few users report that the star cutout is slightly undersized, making it hard to press onto the blade mount. A quick pass with a round file or reamer fixes this, but it’s an annoyance.
• Not as durable as OEM blades. The stainless steel is thinner and softer than some genuine Worx blades. They dull faster if you hit sticks, rocks, or thick weeds. Expect to replace them more often in rough conditions.
• Inconsistent quality control. A small number of blades may have burrs or uneven edges. Inspect each one before installing. You might get a dud in a pack of 24, but the low price compensates.
• Not for heavy-duty or mulching use. These are standard cutting blades, not mulching blades. If you’re trying to chop leaves or thick grass clippings, they’ll clog or dull quickly.

Bottom Line

The 24pack WG794 WA0190 Replacement Blades are a smart buy for Worx Landroid owners who mow regularly and want to keep spare blades on hand without breaking the bank. At $14.99 for 24 blades, the value is undeniable. They cut cleanly, resist rust, and fit most Worx robotic mowers. The main trade-offs are slightly tighter fitment and shorter lifespan compared to genuine Worx blades. If you’re comfortable with a minor tweak and don’t mow over rocks or sticks, these are a no-brainer. For perfectionists or those with rough terrain, stick with OEM. But for the average homeowner, this pack delivers excellent bang for the buck.

Frequently Asked Questions

Q: Will these blades fit my Worx Landroid model? A: They fit most Worx Landroid models that use the WG794 blade mount and WA0190 blade. This includes the M, S, and L series from 2016 onward. Check your owner’s manual or look at your current blade’s star-shaped hole—if it matches, you’re good. They do not fit older Worx models with round or rectangular blades.

Q: How often should I replace these blades? A: For typical lawns mowed every 2–3 days, replace blades every 4–6 weeks. If you mow daily or hit wet grass, swap every 3–4 weeks. Dull blades tear grass, leaving brown tips. You’ll notice when the cut looks ragged. With 24 blades, you have plenty to stay on schedule.

Q: Are these blades sharp enough out of the box? A: Yes, they come sharp enough for normal grass cutting. They’re not surgical-grade, but they’ll slice through fescue, Bermuda, and ryegrass cleanly. If you want a sharper edge, you can hone them with a fine stone