Strongthium 1/4 Fuel Line Hose Kit Gas Tube for Briggs and Stratton MTD Craftsman Troy Bilt Cub Cadet with 1/4 Gas Clamps Valve & Filters 6.6 FT

What It Is

This is a 6.6-foot universal fuel line replacement kit for small engines, including Briggs & Stratton, MTD, Craftsman, Troy-Bilt, and Cub Cadet lawn mowers. It includes 1/4-inch ID fuel hose, two inline fuel filters, a fuel shut-off valve, and four screw-type clamps—ideal for replacing old, cracked, or hardened fuel lines on push mowers, riders, and zero-turns.

Fitment & Compatibility

• Line Size: 1/4-inch inner diameter (ID) – standard for most small engine fuel systems. Do NOT use if your mower requires 3/16-inch or 5/16-inch line.
• Engine Brands: Works with Briggs & Stratton, Kohler, Tecumseh, and Honda engines found on MTD, Craftsman, Troy-Bilt, and Cub Cadet chassis.
• OEM vs Aftermarket: This is a universal aftermarket kit. It will not match exact OEM pre-formed bends, but it’s flexible enough to route around most engine layouts.
• What to Check Before Buying: Measure your old fuel line ID (inner diameter) with a drill bit or caliper. Verify your fuel tank and carburetor inlet both accept 1/4-inch barbed fittings. If your mower has a primer bulb, the line may be smaller—this kit won’t fit.

Key Things to Know

• Fuel Valve Included: The shut-off valve is handy but made of plastic. If your mower vibrates heavily, consider upgrading to a metal valve.
• Filter Placement: Use one filter between tank and valve, the other between valve and carburetor, or keep one as a spare. Do not install both inline without enough clearance.
• Installation Difficulty: Easy (15-30 minutes). You’ll need only a utility knife or scissors to cut the hose to length. No special tools required.
• Common Gotcha: The hose may be slightly stiff in cold weather. Warm it with a heat gun or hair dryer to make it pliable for tight bends.

Should You Buy It

Buy this kit if you need a quick, affordable fix for a cracked or leaking 1/4-inch fuel line on a common brand mower. It’s a solid value for DIYers who don’t need OEM-specific bends or premium materials. Skip it if you require a precise pre-formed line or a metal shut-off valve for heavy-duty commercial use.