Cnfaner 16100-Z0L-853 Carburetor for Honda GCV160A GCV160LA0 GCV160LA 5.5hp 160cc Lawn Mower Engines

What It Is

This is an aftermarket carburetor replacement for Honda GCV160 series engines, commonly used on push lawn mowers, pressure washers, and small generators. It controls the fuel-air mixture for combustion, and is a direct drop-in replacement for the OEM part 16100-Z0L-853.

Fitment & Compatibility

• Engine models: Fits Honda GCV160A, GCV160LA0, GCV160LA (5.5hp, 160cc).
• Not compatible with GCV160 without suffix letters or other Honda engine series (e.g., GCV190, GCV135).
• Cross-check your engine code – it’s stamped on a metal tag near the spark plug or under the top cover.
• Deck size irrelevant – fitment is purely engine-based, not mower brand or deck width.
• Aftermarket part – not OEM Honda; includes gaskets but may require minor adjustment of throttle/choke linkage.
• Dimensions: Identical bolt pattern and intake/exhaust ports to OEM. Measure mounting stud spacing (about 60mm center-to-center) if unsure.

Key Things to Know

• Quality variance: Some units may have rough idle or need float adjustment out of the box. Clean any debris from jets before installing.
• Installation difficulty: Moderate – requires removing air filter housing, fuel line, and two bolts. Have a small screwdriver and pliers ready.
• Common gotcha: The throttle and choke linkage arms can be stiff or misaligned; compare with your old carb and swap springs if needed.
• Fuel system prep: Replace the fuel filter and use fresh gas to prevent future clogging. The included gaskets are thin – apply a dab of oil to seat properly.

Should You Buy It

Buy this if you need a budget-friendly fix for a Honda GCV160 that’s hard-starting, surging, or leaking fuel, and you’re comfortable with basic wrenching. Avoid if you want OEM reliability for heavy commercial use – the cost savings come with occasional tweaking. It’s a solid value for home owners with a single mower.