Carburetor for Swisher FC14560CL 14.5 HP 60in Tow Behind Mower

What It Is

A direct-replacement carburetor for the Swisher FC14560CL 14.5 HP 60in tow-behind mower, supplying the air-fuel mix to the engine. Designed for Briggs & Stratton engines commonly paired with larger Swisher tow-behind models, not for walk-behind or zero-turn mowers.

Fitment & Compatibility

Must check before buying:

• Exact model match: This carburetor is listed for Swisher FC14560CL. Verify your mower’s model number on the frame decal near the engine. It may also fit other Swisher tow-behinds with a 14.5 HP Briggs & Stratton engine (e.g., FC14560, FC14560B), but cross-reference your engine model.
• Engine brand: Only for Briggs & Stratton 14.5 HP engines (typically the 31C707 or 31C707-0034). Not for Kohler, Honda, or Kawasaki.
• OEM vs aftermarket: This is an aftermarket part, not genuine Swisher or Briggs & Stratton. Expect similar function but may lack OEM fit/finish.
• Measurements: Compare gasket spacing, mounting holes, and bowl diameter to your old carburetor. Aftermarket tolerances can vary slightly—ensure no mismatch in choke linkage or fuel inlet angle.

Key Things to Know

• Quality concerns: With only one review (5.0 stars), reliability is unproven. Check for casting burrs inside fuel passages before installing—clean with carb cleaner.
• Installation difficulty: Moderate. You’ll need to remove the air filter housing, disconnect fuel line, and swap the carb. Expect to adjust the idle mixture screw (usually 1.5 turns out from seated) and sync the choke linkage.
• Common gotchas: The fuel inlet may be a different angle than OEM—you might need a short fuel line adapter. Also, the gasket included may be thin; use a thin layer of gasket sealant to prevent vacuum leaks.
• Tuning required: Aftermarket carbs often need minor idle and mixture adjustments. If your mower surges or won’t start, check for debris in the bowl or a misaligned float.

Should You Buy It

If you need a cheap, quick fix for a non-starting or rough-running Swisher tow-behind with a Briggs 14.5 HP engine, this carburetor is worth a try—but only if you’re comfortable with basic tuning and potential fit issues. For a guaranteed fit and longer life, consider spending more on a genuine Briggs & Stratton replacement.