494768 698183 1/4" Fuel Gas Filter, Shut Off Valve, fuel line with Clamp for Kawasaki Kohler BS John Deere Murray Snapper Toro Lawn Mower(1Set)

What It Is

This is a universal fuel line kit that combines a 1/4-inch fuel filter, a shut-off valve, and a length of fuel line with clamps. It’s designed for small engines found on walk-behind mowers, zero-turn mowers, and garden tractors—commonly used with Kawasaki, Kohler, Briggs & Stratton, John Deere, Murray, Snapper, and Toro equipment.

Fitment & Compatibility

Before buying, check these three things:

• Line diameter: The fuel line is 1/4-inch (6.35mm) inside diameter. Measure your existing line with a caliper or against a 1/4-inch drill bit. If your engine uses 5/16-inch or 3/16-inch line, this kit won’t seal properly.
• Filter orientation: This is an inline filter with barbs on both ends. It works with gravity-fed or pulse-pump systems, but not on pressurized fuel-injected engines (rare on lawn mowers).
• Valve placement: The shut-off valve is manual and fits inline. Ensure you have enough space to mount it between the tank and carburetor without kinking the line.
• OEM vs aftermarket: This is a universal aftermarket part, not OEM. It fits most engines that use a 1/4-inch line, but check your engine’s specific fuel line routing (e.g., Kohler Courage, Kawasaki FH series, Briggs Intek). If you need a pre-formed, curved line for a tight routing, this straight kit may require careful trimming.

Key Things to Know

• Quality concerns: Some users report the filter housing cracks after a season. Inspect it periodically, especially if exposed to direct sun or ethanol-blended fuel.
• Installation difficulty: Easy—15 minutes with basic tools. Cut the line to length, push barbed ends in (warm the line in hot water if stiff), and tighten the included clamps. No special skills needed.
• Common gotcha: The shut-off valve’s lever may be stiff initially. Cycle it a few times before installing to ensure it moves freely. Also, the fuel line is rubber, not silicone or viton—avoid contact with strong solvents or brake cleaner.
• Kit completeness: You get about 12 inches of line, two clamps, one filter, and one valve. For most mowers, you’ll have extra line. If your mower requires two separate fuel lines (e.g., for a fuel pump return), you’ll need a second kit.

Should You Buy It

This is a solid budget-friendly choice if you need a quick replacement for a cracked, leaking, or clogged fuel line system on a standard walk-behind mower or small tractor with a 1/4-inch line. It’s not for high-hour commercial use or engines with tight, pre-shaped routing. If you value long-term durability or need exact OEM fitment, spend more on a brand-name filter (e.g., Briggs & Stratton 498250) and a pre-formed hose. For most homeowners doing a one-time fix, this kit works fine.