16100-Z8B-871 Carburetor for Honda HRR2168VKA HRR2169VLA HRR2168VYA HRR2165VKA HRR2166VKA HRR2167VKA HRR2168PKA Lawn Mower parts Replacement 16100-Z1L-854

What It Is

This is a complete aftermarket carburetor assembly for Honda HRR216 series mowers, designed to replace the OEM Honda part 16100-Z1L-854. It mixes fuel and air for the engine and is a direct fit for the GXV160 engine used in these models.

Fitment & Compatibility

Before buying, confirm your mower model is one of these: HRR2168VKA, HRR2169VLA, HRR2168VYA, HRR2165VKA, HRR2166VKA, HRR2167VKA, or HRR2168PKA. Check your engine label—it must be a GXV160. While listed for 21-inch deck models, verify your deck size is 21 inches. This is a non-OEM part, so expect slight differences in gasket thickness or adjustment screw quality compared to the original Honda carburetor. Measure the mounting bolt spacing (should be 52mm center-to-center) to confirm physical fit.

Key Things to Know

• Quality vs OEM: This carburetor works well for most users but may need minor adjustment of the idle mixture screw (turn 1.5 turns out as a starting point) to avoid surging or stalling.
• Installation difficulty: Moderate. You’ll need to remove the air filter housing, fuel line, and throttle linkage. Watch for two small O-rings on the fuel inlet—they’re easy to lose.
• Common gotcha: The included gaskets may be thinner than OEM. Use the old gasket if the new one leaks. Also, check the float bowl for debris before installing.
• Fuel system prep: Clean the fuel tank and line before installation. Old varnish or dirt will clog the new carburetor quickly.

Should You Buy It

If your Honda HRR216 mower has a GXV160 engine and you need a budget-friendly replacement for a worn or clogged carburetor, this is a solid choice. It’s not for professional landscapers who need OEM reliability, but for homeowners, it’s a cost-effective fix that usually works out of the box with minor tuning.