Stens Scraper bar 780-132 for Toro 119-7601-01

What It Is

The Stens scraper bar 780-132 is a replacement wear part designed to mount under the deck of select Toro commercial mowers, scraping off built-up grass and debris to improve cut quality and discharge. It is a direct aftermarket alternative to the Toro OEM part 119-7601-01.

Fitment & Compatibility

Before buying, confirm your mower’s deck size (must be 52 or 60 inches) and model. This bar fits Toro Groundsmaster 4000, 4500, and 4700 series, plus Toro Reelmaster 3100, 3500, and 5000 series with 52” or 60” side-discharge decks. It does not fit 36” or 72” decks. Measure the existing bar’s length (approx. 52” or 60”) and bolt pattern (two 3/8” holes on 4” centers). If your mower uses a different hole spacing, this bar won’t align. Check your model number against Stens cross-reference or Toro OEM part 119-7601-01 for exact match.

Key Things to Buy

• Quality vs. OEM: Stens is a reputable aftermarket brand; this bar is made from hardened steel and should match OEM durability. Expect slightly rougher edges than Toro’s cast part, but function is identical.
• Installation difficulty: Easy – typically 15-30 minutes. Requires removing two bolts and sliding the old bar out. No special tools needed beyond a socket wrench.
• Common gotcha: The bar must be oriented with the angled edge facing the blade rotation (usually toward the front of the deck). Installing it backward will reduce scraping effectiveness and may cause vibration.
• Wear indicator: Replace when the scraping edge is worn flat or the bar is bent. A worn bar leaves a grass strip under the deck, reducing cut quality.

Should You Buy It

Yes, if you own a compatible Toro Groundsmaster or Reelmaster with a 52” or 60” deck and the original bar is worn or missing. At $26.47, it’s a cost-effective fix that restores deck cleaning performance. Avoid if your deck is a different size or your mower uses a non-standard bolt pattern.