Replacement Steering Bushing Fits for MTD 941-0475 741-0475 Troy-Bilt Huskee Bushing (8 Pack)

What It Is

This is a set of eight replacement steering bushings designed for MTD-branded lawn tractors, including Troy-Bilt and Huskee models. They reduce steering slop and wear in the front axle pivot or steering linkage, restoring precise control.

Fitment & Compatibility

• OEM cross-reference: Replaces MTD part numbers 941-0475 and 741-0475. Verify your original part number matches.
• Physical check: Measure bushing length (~0.75 in), outer diameter (~0.75 in), and inner hole diameter (~0.5 in). Compare with your old bushing.
• Model fit: Fits many MTD, Troy-Bilt, and Huskee lawn tractors with steering spindles or axle pivots using these bushings. Common on models with 42–54 in decks (e.g., TB42, Pony, Bronco). Cross-check your tractor’s model number against MTD’s compatibility list.
• Aftermarket note: These are non-OEM replacements. Quality and fit may vary slightly from OEM, but reviews indicate good compatibility.

Key Things to Know

• Installation difficulty: Easy – typically requires only a wrench or socket to remove the steering spindle bolt, then press old bushing out and new one in. No special tools needed.
• Material: Usually nylon or oil-impregnated bronze; these are likely nylon (hard plastic). Nylon is durable but can squeak if dry; a dab of grease helps.
• Common gotcha: If your steering is still loose after replacement, check for worn steering gears or tie rod ends—this bushing only cures pivot slop.
• Pack size: You get 8 bushings, but most tractors use 2–4. Keep spares for future wear.

Should You Buy It

If your MTD/Troy-Bilt/Huskee tractor has steering wobble or play in the front axle pivot, and you’ve confirmed the bushing dimensions match, this is a cheap, effective fix. Right for DIY homeowners who want tight steering without replacing the whole steering assembly.