Pitman Lever Fits Ford 501 Sickle Mower 340 Utility Tractor 7501112

What It Is

The Pitman Lever is a drive component that connects the tractor’s power take-off (PTO) to the sickle bar on a Ford 501 Sickle Mower. It converts rotational motion into the reciprocating action needed to cut hay or brush. Designed for use with Ford 501 mowers mounted on Ford 340 Utility Tractors.

Fitment & Compatibility

• Primary fit: Ford 501 Sickle Mower only (not the 500, 502, or 503 models).
• Tractor compatibility: Ford 340 Utility Tractor; verify your tractor’s PTO shaft size and mounting bracket configuration.
• OEM cross-reference: Replaces Ford part number 7501112. Aftermarket part, not OEM.
• Critical measurements: Check the lever’s hole diameter (typically 1/2” or 5/8”) and overall length (approx. 8-10 inches). Measure your existing lever’s center-to-center distance between pivot holes to confirm match. Mower serial number may affect fit—check your mower’s ID plate.
• Deck size: Not deck-specific; this is a mower drive part, not a deck part.

Key Things to Know

• Wear item: The bushing at the pivot point wears over time, causing slop and vibration. Replace the bushing simultaneously if worn.
• Installation difficulty: Moderate. Requires removing the PTO drive belt and possibly the mower’s pulley guard. Basic hand tools and a puller may be needed.
• Alignment check: After installation, ensure the lever is parallel to the sickle bar’s drive arm to avoid binding.
• Lubrication: Grease the pivot points before first use. Some aftermarket levers come pre-greased, others do not.

Should You Buy It

If you own a Ford 501 Sickle Mower on a 340 Utility Tractor and your original lever is bent, cracked, or has excessive play, this is a direct, cost-effective replacement. It’s a solid aftermarket option for a simple mechanical part, but double-check your lever’s hole spacing and length before ordering to avoid a return.