Lawn Striping Kit Replace 19A70060 Fit for Cub Cadet ZT1 Ultima 42" 50" 54" Stamped Deck Zero Turn Mowers, Grass Striping Roller Kit

What It Is

This is an aftermarket striping kit designed to replace OEM part 19A70060 for Cub Cadet ZT1 Ultima zero-turn mowers with 42", 50", or 54" stamped decks. It adds a roller to press grass down as you mow, creating dark/light stripes for a professional lawn finish.

Fitment & Compatibility

• Deck type: Stamped (fabricated) decks only. Not for fabricated/fab decks.
• Mower models: Cub Cadet ZT1 Ultima series from 2018-2024. Check your manual for stamped deck spec.
• OEM vs aftermarket: This is not genuine Cub Cadet but claims to match 19A70060. Verify mounting bracket hole spacing (typically 5.5" on center) on your deck’s rear edge.
• Measurement check: Measure deck width and ensure roller length matches (42", 50", or 54" option). Also check clearance between deck and ground—roller adds ~3-4" rear overhang.
• Bolt pattern: Use included hardware, but confirm bolts are grade 5 or better for vibration resistance.

Key Things to Know

• Single 1.0-star review suggests possible quality or fit issues—proceed with caution. No additional user feedback exists.
• Installation difficulty: Moderate. Requires lifting mower deck (use jack stands) and drilling if your deck lacks pre-drilled mounting holes. Expect 30-60 minutes.
• Common gotchas: Roller may contact discharge chute on 42" models. Check clearance before tightening. Also, roller bearings may be plastic—grease before install.
• Performance: On stamped decks, striping effect is decent but not as crisp as OEM or heavy-duty rollers. May leave faint lines on wet grass.

Should You Buy It

Only if you already have a Cub Cadet ZT1 Ultima with a stamped deck, want stripes on a tight budget, and are comfortable drilling/modifying your mower. The single poor review and lack of feedback make this a gamble—consider spending $20-30 more for a known brand or OEM part for guaranteed fit and durability.