Lawn Stripe Kit for Ferris ISX800, 52", 60" & 61" Inch Decks, Professional-Grade, Heavy Duty Rear Deck Mounted Grass Roller Striper

What It Is

This is a heavy-duty rear-mounted grass roller striper designed to create professional-looking lawn stripes on Ferris ISX800 zero-turn mowers with 52", 60", or 61" decks. It’s for commercial operators or serious homeowners who want straight, dark stripes without buying a new mower.

Fitment & Compatibility

Before buying, confirm your mower is a Ferris ISX800 series—not the ISX, IS, or other Ferris models. Measure your deck width: this kit fits 52-inch, 60-inch, and 61-inch decks only. Check that your rear deck mounting points are exposed and unobstructed (some Ferris models have rear discharge chutes or bagger brackets that block installation). This is an aftermarket kit, not OEM Ferris, so verify bolt pattern and clearance: you’ll need at least 4 inches of vertical clearance between the deck’s rear edge and the ground when the deck is at its lowest cutting height. Also ensure your mower’s rear tires don’t interfere with the roller arms—measure 6 inches inward from each side of the deck.

Key Things to Know

• Quality concerns: The product has a 1.0/5 rating from a single review, which suggests potential issues with fit, durability, or customer support. Read that review carefully if available.
• Installation difficulty: Moderate to hard. Expect to drill or modify mounting brackets if your deck lacks pre-drilled holes. You may need basic tools (wrenches, drill, level) and about 1–2 hours.
• Common gotchas: The roller may drag on uneven terrain, causing scalping on slopes. It adds significant weight (approx. 20–30 lbs) to the rear deck, which can affect steering and traction on wet grass. Also, the roller may not clear rear bagger or mulching attachments.
• Maintenance: Roller bearings may require periodic greasing; check for rust if left outdoors.

Should You Buy It

Only buy this if you have a Ferris ISX800 with one of the three listed deck sizes, you’re committed to striping professionally, and you’re willing to risk a poor fit or return process given the single low review. For most users, a higher-rated aftermarket kit (e.g., from Toro or a dedicated striping brand) or a DIY PVC roller is a safer, cheaper bet.