Gardzen 1.5" x 100' Landscape Edging Kit, No Dig Lawn Garden Border with 120 Pcs Spikes, Flexible Edging Border for Mulch Bed Pathway Paver

What It Is

The Gardzen 1.5" x 100’ Landscape Edging Kit is a no-dig, flexible lawn border system for defining garden beds, mulch areas, pathways, or paver edges. It’s not a mower part—it’s a landscaping accessory used to separate grass from planted areas, reducing mower trimming work.

Fitment & Compatibility

• No machine fitment required—this is a ground-installed edging, not a mower component.
• Check your lawn shape: the 1.5-inch height is best for light-duty borders (mulch beds, flower beds, walkways). For deeper root barriers or steep slopes, you may need taller edging (4–6 inches).
• Spike count: 120 spikes are included—enough for roughly 100 feet with spikes every 10–12 inches. For soft or sandy soil, buy extra spikes separately.
• Material compatibility: works with any soil type (clay, loam, sandy) but won’t hold against aggressive grass species like Bermuda or zoysia without deeper anchoring.
• OEM vs aftermarket: this is a generic aftermarket product; no OEM equivalent exists.

Key Things to Know

• Installation difficulty: easy, no digging required—just hammer spikes through the pre-punched holes. Takes about 30 minutes for 100 feet with a rubber mallet.
• Quality: PVC material is flexible but can become brittle in freezing temperatures (below 20°F). Avoid installing in winter.
• Common gotcha: the edging may buckle or pull up if you hit it with a mower or string trimmer repeatedly. Bury the bottom edge 1–2 inches into soil for better stability.
• Spike length: spikes are 6 inches long—adequate for most lawns, but shallow in sandy soil. Consider 8-inch spikes for loose ground.

Should You Buy It

Buy this if you want a quick, budget-friendly way to separate grass from mulch or flower beds without digging trenches. It’s ideal for light-duty borders on level ground, but skip it if you need permanent, heavy-duty edging for aggressive grass or high-traffic areas—opt for steel or rubber edging instead.