BlueStars 925-0267 STD365402 Ignition Switch 3 Position 5 Terminals - Compatible with MTD Craftsman John Deere Toro Snapper Scag Craftsman Riding Lawn Mowers - Replaces 24688 24695 925-0267A 725-0267

What It Is

This is a 3-position (Off/Run/Start), 5-terminal ignition switch designed to replace worn or failed switches on riding lawn mowers and garden tractors. It’s a direct-fit aftermarket part for many MTD, Craftsman, John Deere, Toro, Snapper, and Scag models.

Fitment & Compatibility

Before buying, verify three things:

1. OEM part numbers – It replaces MTD 925-0267, 925-0267A, 725-0267, and John Deere STD365402, AM125424. Also cross-references 24688 and 24695.
2. Terminal layout – The switch has 5 flat blade terminals arranged in a specific pattern (usually labeled B, S, A1, A2, G). Confirm your existing switch has the same terminal arrangement and that the wire harness connector matches (most use standard .250" female spade connectors).
3. Mounting hole – The switch has a 1/2" diameter threaded body. Ensure your mower’s dash panel has a 1/2" hole and enough clearance behind it for the 1.5" body length.

Does not fit zero-turn mowers with keyless start or push-button ignition systems.

Key Things to Know

• Quality – Solid aftermarket build; most users report it works as well as OEM. The plastic housing is durable but not impact-proof.
• Installation difficulty – Easy (10-15 minutes). Disconnect battery, unplug old switch, remove lock nut, swap, reconnect. No special tools needed.
• Common gotchas – The terminal labeling may differ from your original switch. Take a photo of the wire positions before removing. If your mower has a separate safety module or PTO interlock, this switch won’t affect that system.
• Wiring note – Some models use a metal bracket that grounds through the switch body. This switch is all plastic, so if your original relied on chassis ground through the switch, you may need to add a ground wire to terminal G.

Should You Buy It

Yes, if you have a riding mower with a failed 3-position ignition switch and your original part number matches the cross-reference list. It’s a budget-friendly, reliable replacement for most Craftsman, MTD, and John Deere lawn tractors. Skip it if you need a 4-position switch (with lights or accessory position) or a different terminal layout.