42Inch Deck Rebuild Kit with 2xSpindle for 130794 + 2xPulley for 153535 + 2xIdler for 173438 173437 + 2xBlade for 127843 + 1xBelt for 144959 - for Craftsman LT1000 LT2000 Tractor,HU, Poulan Pro Mower

What It Is

This 42-inch deck rebuild kit includes two spindles, two pulleys, two idlers, two blades, and one belt, designed to restore cutting performance on Craftsman LT1000/LT2000 tractors and compatible Poulan Pro mowers with a 42-inch fabricated deck.

Fitment & Compatibility

Before buying, confirm your deck is exactly 42 inches (measured blade tip to blade tip). This kit fits Craftsman LT1000, LT2000, and many Husqvarna/Poulan Pro models using deck part numbers 130794 (spindle), 153535 (pulley), 173438/173437 (idler), 127843 (blade), and 144959 (belt). Check your mower’s model number (under seat or on frame) and cross-reference with these OEM part numbers. The blades are 16.5 inches long with a 1-inch center hole and a 0.25-inch offset—measure your existing blades to confirm. The belt is 1/2-inch wide by 96.5 inches long. This is an aftermarket kit, not OEM, so fit may vary slightly on non-listed models.

Key Things to Know

• Quality varies – Some users report spindles and pulleys are adequate for residential use but may wear faster than OEM under heavy or commercial use. Check bearings for smooth rotation before installing.
• Moderate installation – Replace all components at once for even wear. You’ll need a jack, socket set, and possibly a puller for stuck pulleys. Expect 1–2 hours.
• Common gotcha – The idler arm bolts may not align perfectly on older decks; you might need to enlarge holes slightly. Also, the belt may be slightly tight—adjust tension with the idler spring.
• Blade balance – After installing, balance the blades (use a balancer or nail) to prevent vibration that can damage spindles.

Should You Buy It

If your 42-inch Craftsman LT1000/LT2000 or compatible Poulan Pro mower has worn spindles, noisy idlers, or dull blades, this kit is a cost-effective one-stop fix for residential use. It’s not for commercial mowing or decks outside the exact part number range, but for a weekend DIY rebuild, it provides decent value at ~$88—just check fitment carefully first.