3" Button Paper Cutter Graphic Punch Die Cutter for 3" Badge Making, 3.386" Circle Punch Cutter Round Paper Cutter

What It Is

This is a manual punch die that cuts 3.386-inch diameter circles from paper, cardstock, or thin materials. It’s designed for 3-inch button/badge making machines (like those from Button, Tecre, or similar brands) to produce consistent round blanks for pinback buttons or magnets.

Fitment & Compatibility

• Punch diameter: 3.386 inches (86mm) – cuts a circle slightly larger than the finished 3-inch button to allow for crimping.
• Compatibility: Works with most standard 3-inch button press machines that accept interchangeable dies. Verify your machine’s die holder size and locking mechanism (threaded vs. clamp).
• Material thickness: Rated for paper up to 0.02 inches (standard 10-12pt cover stock). Not for plastic, metal, or thick cardstock without testing.
• OEM vs. aftermarket: This is a generic aftermarket die. It may not fit tight-tolerance OEM machines (e.g., older Tecre or Badge-A-Minit models) without slight adjustment. Measure your existing die’s outer diameter and shank length before ordering.

Key Things to Know

• Quality control: Some users report slight burrs on the cutting edge. A quick deburring with fine sandpaper improves clean cuts.
• Installation: No tools needed – simply swap out your current die. Ensure it’s fully seated to avoid jamming or uneven cuts.
• Common gotcha: The 3.386" cut size is critical. If your button machine uses a different blank diameter (e.g., 3.5"), this die won’t work. Measure your current blanks first.
• Durability: Carbon steel construction is fine for hobby use but may dull faster with heavy production (1000+ cuts). Expect to replace after 2-3 years of regular use.

Should You Buy It

Buy this if you need a reliable, affordable replacement die for a 3-inch button press and you’re comfortable with basic fitment checks. It’s a good value for hobbyists or small-scale makers, but if you run high-volume production or need exact OEM tolerances, stick with your machine’s brand-specific die.