2PK Genuine OEM Wright Stander Mowers Urethane Bushing 17460005

What It Is

This is a genuine OEM urethane bushing (part number 17460005) designed for Wright Stander mowers. It serves as a pivot or suspension component, reducing vibration and wear in the mower’s deck or chassis linkage system.

Fitment & Compatibility

• Brand fit: Only for Wright Stander models—not universal or compatible with other brands.
• Check your model: Verify your Wright Stander model number (e.g., Stander X, Stander ZK, or Stander B) against the parts diagram. This bushing is often used in the deck lift or caster wheel pivot.
• OEM vs aftermarket: This is a genuine Wright part, so it matches factory specs exactly. Aftermarket bushings may differ in hardness or dimensions.
• Measurements: The bushing is urethane, typically 1” outer diameter, 0.5” inner diameter, and 0.75” long—but always confirm by measuring your old bushing or checking your mower’s manual.
• Quantity: Sold as a 2-pack, so you get both needed for most applications.

Key Things to Know

• Material advantage: Urethane lasts longer and resists wear better than rubber, especially in high-vibration or wet conditions.
• Installation: Simple hand-tool job—no special skills required. Use a punch or socket to press out the old bushing; the new one should slide in with light tapping.
• Common gotcha: Don’t over-tighten the bolt or pin after installation—this can distort the bushing and cause premature failure. Torque to spec in your manual.
• Check for wear: If your mower has slop in the deck or caster area, or if you hear clunking, these bushings are a likely culprit.

Should You Buy It

If you own a Wright Stander mower and notice any looseness, vibration, or wear in the deck or caster pivots, this 2-pack is a direct, durable fix. It’s a no-brainer for OEM reliability—skip cheaper aftermarket alternatives that may not fit or last.