MoJack ZR350 45005 Residential Riding Lawn Mower Lift - 350 Pound Lift Capacity, Zero Turn Radius Mowers, for Safe & Efficient Maintenance Review

Overview

The MoJack ZR350 45005 is a dedicated lift for zero-turn riding mowers, designed to make blade sharpening, deck cleaning, and under-deck maintenance far safer and easier than crawling on your back. With a 350-pound lifting capacity, it’s built for residential zero-turn mowers—think John Deere Z-series, Husqvarna Z200 series, or Cub Cadet ZT models—not heavy commercial units. If you’ve ever balanced a mower on cinder blocks or jacked it up with a car floor jack, this is the smarter, purpose-built alternative.

Who Should Buy This

• Homeowners with zero-turn mowers who do their own maintenance. If you sharpen blades, change belts, or clean the deck more than once a season, this lift saves your back and your time. No more lying in the grass with a wrench.
• DIYers who want safe, stable access under the mower. The ZR350 uses a jacking mechanism with locking pins, not a flimsy scissor jack. It’s built for repeated use without wobbling.
• People with limited garage or shed space. The lift folds flat for storage (about 6 inches tall when collapsed) and weighs under 30 pounds. You can hang it on a wall hook or slide it under a workbench.
• Owners of residential zero-turn mowers under 350 pounds. If your mower is a light-duty or mid-duty model (most sub-$4,000 zero-turns), this lift fits. Heavier commercial mowers (e.g., 48-inch+ decks, welded frames) may exceed the capacity.

Key Features Breakdown

• 350-Pound Lift Capacity: This covers the vast majority of residential zero-turn mowers. A typical 42-inch deck zero-turn weighs around 500–600 pounds, but the deck itself and the lift point are well under that. The lift handles the mower’s front or rear axle, not the whole machine. It’s rated for the load you’ll actually lift.
• Zero-Turn Radius Mower Compatibility: The lift’s saddle and frame are shaped to fit the narrow, low-clearance chassis of zero-turn mowers. It won’t work well on a traditional lawn tractor with a wide front axle or a rear-engine rider.
• Jacking Mechanism with Locking Pin: You raise the mower with a long handle (like a floor jack), then insert a locking pin to hold it securely. This is far safer than relying on hydraulic pressure alone. The pin clicks into one of several height settings, so you can stop at a comfortable working height.
• Low Profile and Wide Base: The lift sits only 3 inches off the ground, so you can roll or drive the mower over it without ramps. The base is wide enough to prevent tipping, even on slightly uneven concrete.
• Folds Flat for Storage: The entire unit collapses to about 6 inches tall. For anyone with a packed garage, this is a major plus. You can stash it behind a shelf or hang it on a wall.

Pros

1. Massively safer than improvised jacks. The locking pin eliminates the nightmare of a jack slipping while you’re under the mower. It’s the single best safety feature.
2. Easy to use solo. Slide the lift under the mower’s axle, pump the handle a few times, insert the pin, and you’re done. No need for a second person.
3. Folds flat for storage. At 6 inches collapsed, it takes up almost no space. This is rare in mower lifts—many are bulky and permanent.
4. Works on most residential zero-turns. If you have a popular brand like John Deere, Husqvarna, Cub Cadet, or Bad Boy (under 350 lbs), it’s a safe bet. Check your mower’s weight and axle clearance.
5. Sturdy steel construction. It feels solid under load. No flexing or wobbling, even when lifting a 600-pound mower by the front axle.
6. Clear instructions and simple assembly. Most users have it put together in 20 minutes with basic tools.

Cons

1. Not for commercial or heavy-duty zero-turns. If your mower weighs over 350 pounds at the lift point (e.g., a 60-inch deck, welded frame, or heavy fabrication), this lift won’t handle it. You need the MoJack ZR600 or a commercial-grade lift.
2. The handle can be awkward on low-clearance mowers. On some zero-turns with extremely low frames, you may need to tilt the mower slightly to slide the lift under. It’s not a deal-breaker, but it adds a minor step.
3. No built-in wheels. Once the mower is lifted, you can’t roll the lift around. It’s stationary. If you need to move the mower while elevated, you’ll need a different solution.
4. The locking pin can be fiddly to align. A few users report that the pin holes don’t line up perfectly at every height setting. It’s not a safety issue, but you may need to adjust the mower’s position slightly.

Bottom Line

The MoJack ZR350 is the best affordable lift for residential zero-turn mower owners who value their back and their safety. It eliminates the sketchy practice of using car jacks, blocks, or ramps to get under your mower, and it stores flat when not in use. The 350-pound capacity covers most homeowner-grade zero-turns, and the locking pin design gives real peace of mind. If you maintain your own mower and own a sub-350-pound zero-turn, buy this. If you have a heavy commercial machine, look at the MoJack ZR600 or a hydraulic lift.

Frequently Asked Questions

Q: Will this lift work on my John Deere Z335E (or similar 42-inch deck zero-turn)?
A: Almost certainly yes. The Z335E weighs about 500–550 pounds total, but the front axle lift point is well under 350 pounds. The lift’s saddle fits the narrow frame. Measure your axle clearance first—if you can slide a 3-inch tall lift under it, you’re golden.

Q: Can I use this lift to change blades without removing the deck?
A: Yes, that’s the main use. Lift the mower by the front or rear axle (whichever gives you best access to the blade area), lock the pin, and you can reach the blades easily. For rear-discharge decks, lifting the rear axle often works best.

Q: Does it come with a warranty?
A: MoJack offers a 1-year limited warranty on the ZR350 against defects in materials and workmanship. It’s not a lifetime warranty, but for a $200 tool, that’s standard. Keep your receipt and register the product online.