Fuel Pickup Assembly 05106200 Compatible with Ariens Ikon Fuel Pickup Line 42 48 52 60 for Gravely ZTX ZT XL Zero-turn Lawn Mowers Gas Tank Pickup Tube Stem Review

Overview

The Fuel Pickup Assembly 05106200 is a replacement gas tank pickup tube and stem designed specifically for Ariens Ikon and Gravely ZT, ZTX, and ZL zero-turn mowers with 42, 48, 52, or 60-inch decks. At $19.45, it’s a budget-friendly fix for a common failure point: the original pickup assembly cracks or clogs, leaving your mower starving for fuel. This part is best for DIY owners who want to avoid a $150+ dealership trip and need a direct, no-modification swap to get their mower running again.

Who Should Buy This

• Ariens Ikon owners (42-60 inch decks) – If your Ikon sputters, stalls, or won’t start after sitting, this pickup assembly is the first thing to check. It’s a known wear item on these mowers, and this replacement fits without trimming or adapters.
• Gravely ZT/ZTX/ZT-L owners – Same story here. Gravely uses the same fuel pickup design, and this part is a drop-in replacement for models with the 05106200 part number. If your mower has over 200 hours, expect to swap this eventually.
• DIY mechanics who hate dealership markups – The OEM part can cost $35-50, and a shop will charge labor on top. This $19.45 alternative saves real money, and the install takes about 20 minutes with basic hand tools.
• Owners of mowers with ethanol-damaged fuel systems – Ethanol fuel eats away at plastic pickup tubes over time, causing cracks. If you’ve seen fuel stains or smelled gas near the tank, this assembly is a direct replacement for the brittle original.

Key Features Breakdown

• Compatibility: Ariens Ikon 42, 48, 52, 60 and Gravely ZT/ZTX/ZT-L – This isn’t a universal part. It’s specifically engineered to match the tank shape, stem length, and pickup angle on these models. No cutting, bending, or jury-rigging required.
• Material: Nylon/plastic construction – The original pickup stem is prone to cracking from heat cycles and ethanol exposure. This replacement uses a similar nylon blend, which is a fair trade-off—it’s flexible enough to install but won’t outlast a metal part. Expect 2-4 years of life with regular use.
• Design: Integrated pickup tube and stem assembly – The tube and stem come as one piece with the correct 90-degree bend. This eliminates guesswork on tube length and ensures the pickup sits at the bottom of the tank to draw all the fuel.
• Fitment: Direct OEM replacement – No adapters, no clamps beyond what’s already on your mower. The stem pushes into the tank grommet, and the tube connects to the fuel filter or line exactly like the original. Installation is straightforward.

Pros

1. Exact fit for Ariens Ikon and Gravely zero-turns – No modifications needed. I’ve installed this on an Ikon XD 52, and it matches the original part in every dimension—stem diameter, tube length, and bend angle.
2. Cures stalling and hard-starting issues – If your mower stalls under load or refuses to start after sitting, a cracked pickup tube is often the culprit. This replacement gets fuel flowing again, and many users report an immediate fix.
3. Significant cost savings over OEM – At $19.45, it’s roughly half the price of the Ariens or Gravely branded part. For a wear item you might replace every 2-3 years, that adds up.
4. Simple DIY install – No special tools needed. Remove the tank, pull the old assembly, push in the new one, and reconnect the fuel line. A patient beginner can do it in under an hour.
5. Comes with the tube pre-attached – The pickup tube is already connected to the stem at the correct angle. You don’t have to measure, cut, or secure a separate tube, which eliminates a common source of installation errors.
6. Works with ethanol-blended fuels – While no plastic part is immune to ethanol damage, this assembly is designed to handle E10 fuels better than some older OEM parts, which tend to turn brittle after a season or two.

Cons

1. Not compatible with all Ariens or Gravely models – This only fits Ikon and ZT/ZTX/ZT-L series. If you have an Ariens Zoom or a Gravely Pro-Turn, check your part number first. The stem diameter and tube length differ on other models.
2. Plastic construction is still a weak point – A metal pickup stem would last longer, but this assembly uses the same nylon material as the original. It’s a wear item, not a permanent fix. Expect to replace it again in 2-4 years, especially if you use ethanol gas.
3. No grommet included – The rubber grommet that seals the tank opening isn’t part of this kit. If your original grommet is cracked or loose, you’ll need to buy it separately (part number 05106201). A worn grommet can cause fuel leaks or vacuum issues.
4. Inconsistent quality control – A few users report the tube is slightly too long or the stem doesn’t seat perfectly. In most cases, trimming the tube with scissors solves it, but it’s an annoyance. Check your fit before reassembling the tank.

Bottom Line

The Fuel Pickup Assembly 05106200 is a smart, cost-effective fix for a frustrating problem on Ariens Ikon and Gravely ZT-series zero-turn mowers. If your mower is stalling, hard-starting, or refusing to run, this $19.45 part is the first thing I’d replace—it’s cheaper than a new fuel pump or carburetor and solves most fuel delivery issues on these models. The plastic construction means it won’t last forever, but neither does the OEM part, and this one matches the original exactly. Just be sure to check your mower’s model number and inspect the tank grommet while you’re in there. For the price, it’s a solid buy for any DIY owner who wants to keep their mower running without a trip to the shop.

Frequently Asked Questions

Q: Will this fit my Ariens Ikon XD 60? Yes, if your Ikon XD 60 uses the 05106200 pickup assembly. This part fits all Ikon models with 42, 48, 52, and 60-inch decks, including the XD series. Check your owner’s manual or look at the original part number on the stem before ordering.

Q: Do I need to drain the gas tank before installing? Technically, you can swap it with fuel in the tank, but it’s messy and risky. I recommend draining