Feekoon 4 Pack Universal Power Rake Replacement Springs Compatible with Maxpower 330105, Dethatcher Springs Compatible with Maxpower Arnold 16 Inch Dethatching Mower Blade for Most Lawn Mower Review

Overview

The Feekoon 4 Pack Universal Power Rake Replacement Springs aren’t a mower themselves—they’re a specialized replacement part designed to keep your dethatching blade or power rake attachment working at peak performance. Priced at just $6.99 and rated 4.5 stars from 89 reviews, these springs are built for homeowners who already own a compatible dethatcher (like those from Maxpower or Arnold) and need a quick, affordable fix when the original springs wear out or lose tension. If you’re tired of patchy lawn results from a floppy, ineffective dethatching blade, this kit is your low-cost ticket back to a healthy, thatch-free yard.

Who Should Buy This

1. Homeowners with Maxpower 330105 or Arnold 16-inch dethatching blades – If you own one of these popular models, these springs are a direct drop-in replacement. You’ll save time hunting for the right part.
2. DIY lawn care enthusiasts on a budget – At under $7 for four springs, this is a no-brainer for anyone who maintains their own equipment. One worn spring can ruin a dethatching job; having spares on hand is cheap insurance.
3. Owners of universal power rake attachments for walk-behind mowers – If your dethatcher uses spring-tensioned tines (common on many universal rake kits), these springs are likely compatible. They’re designed to fit most standard mounting holes.
4. Lawn lovers fighting heavy thatch buildup – If you dethatch annually and notice your blade isn’t digging in like it used to, weak springs are often the culprit. Replacing them restores aggressive raking action without buying a whole new attachment.

Key Features Breakdown

• Universal Compatibility: These springs are designed to work with most lawn mower dethatcher blades and power rake attachments, including Maxpower 330105 and Arnold 16-inch models. The key is the spring’s length and tension—it matches OEM specs closely enough to fit standard mounting brackets on brands like Craftsman, MTD, and Troy-Bilt.
• 4-Pack Value: You get four springs in one kit. That’s enough for a full replacement on most single-blade dethatchers (which use two springs) plus two spares. It’s also handy if you have two attachments to service.
• Durable Steel Construction: These are made from heavy-gauge, zinc-plated steel. That means they resist rust better than uncoated alternatives, and they hold their tension longer through repeated use and exposure to grass clippings and moisture.
• Easy Installation: No special tools required—just a pair of pliers to hook the spring ends into the mounting holes on your blade and bracket. Most users report a 5-minute swap.
• Restores Raking Performance: The main job of these springs is to apply downward pressure on the dethatching tines. New springs ensure the tines dig into the thatch layer rather than skipping across the surface, giving you a thorough clean-up.

Pros

1. Cheap fix for a common problem – For the price of a fast-food lunch, you can revive a dethatcher that’s been underperforming. That’s a huge value compared to buying a new attachment ($30-$60).
2. Fits a wide range of mower brands – Users report success with Craftsman, Husqvarna, John Deere, and even some older Murray models. The universal design is a real time-saver.
3. Zinc plating resists rust – Unlike some bare steel springs that corrode after one season, these hold up well to wet grass and storage in damp sheds.
4. Spares included – Having four springs means you can replace all worn ones at once and keep backups. That’s smart planning for next season.
5. Simple, tool-light install – No need to disassemble your mower deck. Just unhook the old springs, hook in the new ones, and you’re done.
6. Consistent tension – Reviewers note that the springs don’t stretch out or sag after a few uses, maintaining even pressure across the blade.

Cons

1. Not a perfect fit for every universal rake – While “universal” is in the name, some users with off-brand or very old attachments report that the spring ends are slightly too large or too small for their mounting holes. Measure your old spring’s hook diameter before buying.
2. Tension can be stiff initially – A few users mention that the springs are tough to hook into place without a good pair of pliers. If you have weak hand strength, this might be a minor struggle.
3. No instructions included – The package is just the springs. If you’re not mechanically inclined, you’ll need to look up a YouTube video or rely on common sense. A simple diagram would help.
4. Not for commercial use – These are light-duty springs meant for residential lawn care. If you run a landscaping business and dethatch daily, they may wear out faster than heavier-duty OEM parts.

Bottom Line

The Feekoon 4 Pack Universal Power Rake Replacement Springs are a near-perfect example of a cheap, targeted solution to a frustrating lawn care problem. If your dethatcher isn’t grabbing thatch like it used to, a set of tired springs is likely the reason—and this kit fixes it for less than the cost of a pizza. While the “universal” claim isn’t 100% foolproof (measure your old springs first), the vast majority of homeowners with Maxpower, Arnold, or standard universal rake attachments will find these an exact match. I recommend buying a pack now, even if you don’t need them immediately, because they’re that affordable and useful to have on the shelf. For $6.99, this is a no-regret purchase that keeps your lawn tools in fighting shape.

Frequently Asked Questions

Q: Will these springs fit my Craftsman dethatcher attachment?
A: Most likely yes. Craftsman uses standard mounting hole spacing on their universal power rakes, and the Feekoon springs are designed to match that. However, measure your old spring’s overall length (about 2-3 inches) and hook diameter (about 1/4 inch) to confirm. If they match, you’re good.

Q: How do I know when my dethatcher springs need replacing?
A: If your dethatcher blade sits flat on the ground when the mower is off, or if the tines barely scratch the soil surface during use, the springs have lost tension. New springs should lift the blade slightly off the ground when not in use, and the tines should dig into thatch about 1/4 to 1/2 inch deep.

Q: Can I use these springs on a tow-behind dethatcher for a lawn tractor?
A: Possibly, but it depends on the design. Tow-behind units often use heavier-duty springs because they cover more ground. These are best suited for walk-behind mower attachments. Check your