Cluparis 561739B 2-Blade Set for 46" Deck, Lawn Mower Medium-Lift Blade Replace for Cut Craftsman, Husqvarna, Poulan 405380, 532-405380, PP21011, AYP 561739 403107, Black Review

Overview

The Cluparis 561739B 2-Blade Set is a direct replacement medium-lift blade kit designed for 46-inch cutting decks on popular lawn tractors from Craftsman, Husqvarna, Poulan, and AYP. At $28.99 for a pair, it offers an affordable way to restore your mower’s cutting performance without paying OEM markup. This set is best for homeowners with 1–3 acre properties who want reliable, no-fuss blade swaps that maintain a clean cut on medium-height grass.

Who Should Buy This

• Owners of 46-inch Craftsman, Husqvarna, or Poulan tractors – If your mower uses OEM part numbers 405380, 532-405380, or PP21011, this set drops right in with no modifications needed.
• Budget-conscious homeowners with 1–2 acres – At under $15 per blade, this set is roughly half the price of OEM blades, making it a smart choice for routine replacements.
• DIY mechanics who prefer sharpening vs. replacing – The medium-lift design and standard steel construction make these blades easy to sharpen with a file or grinder, extending their life beyond a single season.
• Anyone tired of scalping or uneven cuts – The medium-lift profile provides good airflow for bagging and side-discharge without the aggressive suction that can scalp bumpy lawns.

Key Features Breakdown

• Medium-Lift Blade Design – These blades generate moderate airflow under the deck, which is ideal for bagging clippings and side-discharging without pulling up soil or scalping uneven terrain. It’s a balanced approach that works well on typical suburban lawns with some dips and bumps.
• 46-Inch Deck Compatibility – The 2-blade set fits decks measuring exactly 46 inches across. This is a common size on mid-range lawn tractors, so you’re getting a part that matches the factory spacing and hole pattern.
• OEM Cross-Reference – Replaces Craftsman 561739, Husqvarna 532-405380, Poulan PP21011, and AYP 403107. This broad compatibility means you don’t need to guess if it’ll fit your specific model—just check your old blade’s part number.
• Black Coating – The black paint or coating provides basic rust resistance during storage and the first few mows. It’s not a permanent solution, but it helps keep the blades looking fresh while you dial in your sharpening schedule.
• Steel Construction – Standard hardened steel is used here—not stainless or boron steel. That’s fine for normal grass and occasional small sticks, but you’ll want to avoid rocks and thick branches to prevent chipping.

Pros

• Direct fit for popular 46-inch decks – No drilling, filing, or adapter plates needed. Remove the old blades, install these, and torque to spec. It’s a 15-minute job.
• Excellent value at $28.99 for two blades – Comparable OEM sets often run $40–$55, so you’re saving 30–40% without sacrificing cutting quality.
• Balanced medium-lift performance – Good for bagging, mulching (with a mulching kit), and side-discharge. It’s a versatile blade that handles most mowing conditions well.
• Sharp out of the box – Most buyers report these come with a factory edge that cuts cleanly on the first pass. No need to sharpen before installation.
• Works with standard blade removal tools – The 5/8-inch center hole fits common impact wrenches and socket sets, so you don’t need special adapters.
• Quiet operation – The medium-lift design doesn’t create excessive wind noise or vibration, making for a more pleasant mowing experience compared to aggressive high-lift blades.

Cons

• Not for heavy-duty or commercial use – The standard steel will dull faster on thick, wet grass or sandy soil. If you mow over 3 acres weekly or encounter rocks, expect to sharpen every 2–3 mows.
• Black coating wears off quickly – After a few washes or wet mows, the coating can peel or fade. It’s cosmetic, but if you like your blades looking new, you’ll be disappointed.
• Medium lift may not satisfy everyone – If you’re used to high-lift blades for maximum bagging power, these won’t pull clippings up as aggressively. For mulching, you’ll need a dedicated mulching kit or blades.
• No warranty info in packaging – Some buyers report the blades come in a plain bag with minimal documentation. If you have a quality issue, you’ll need to rely on the seller or manufacturer’s return policy.

Bottom Line

The Cluparis 561739B 2-Blade Set is a solid, budget-friendly replacement for 46-inch Craftsman, Husqvarna, and Poulan tractors. It delivers reliable cutting performance for homeowners with 1–2 acres of typical grass, and the medium-lift design strikes a good balance between bagging, discharging, and mulching. You’re not getting premium steel or a long-lasting coating, but at $28.99 for a pair, you’re paying for function over frills. If you’re comfortable sharpening blades every few mows and want to avoid OEM prices, this set is a no-brainer. For commercial use or heavy-duty conditions, spend more on a thicker, high-lift blade.

Frequently Asked Questions

Will these blades fit my 46-inch Husqvarna YTH2348?
Yes, as long as your mower uses OEM part number 532-405380 or PP21011. The YTH2348 typically uses a 46-inch deck with this blade pattern. Double-check your current blade’s part number before ordering.

Do these blades come with a center hole adapter for different spindle sizes?
No. These blades have a standard 5/8-inch center hole, which fits most Craftsman, Husqvarna, and Poulan spindles. If your mower uses a 1-inch or metric spindle, these won’t work without modification.

Can I sharpen these blades, or should I just replace them?
You can sharpen them with a file or angle grinder. The steel is standard hardness, so it sharpens easily. Plan to sharpen after every 6–8 hours of mowing, or sooner if you hit rocks or cut wet grass. Once they’re too thin or chipped, replace them.