Bradley Mowers Two Wheel Mower Sulky with 18" Heavy Duty Lift and Latch Arm B1MS34, TS2006N, 42-066 Review

Overview

The Bradley Mowers Two Wheel Mower Sulky with 18" Heavy Duty Lift and Latch Arm (model B1MS34, TS2006N, 42-066) is a specialized attachment designed to transform your walk-behind two-wheel mower into a ride-on machine. Priced at $419.95, it’s built for professionals and serious homeowners who need to cover larger properties faster without upgrading to a full zero-turn or stand-on mower. This sulky is best suited for operators using Bradley or compatible two-wheel mowers with a 34-inch or similar cutting deck, and it shines on flat to gently sloping terrain.

Who Should Buy This

• Landscaping pros with multiple properties: If you’re mowing 2+ acres daily and your back is tired of walking behind a heavy mower, this sulky cuts fatigue and boosts hourly output by letting you ride while maintaining full control.
• Homeowners with 1-2 acre lawns: For those who already own a Bradley two-wheel mower and want to avoid the cost of a new ride-on mower (which can run $2,000+), this $420 attachment is a smart, affordable upgrade.
• Operators on flat or gentle slopes: The 18-inch lift and latch arm works best on even ground. If your lawn has steep hills or tight, uneven spots, this sulky is less ideal—but for open, rolling terrain, it’s a game-changer.
• Buyers who value durability over fancy features: Bradley is known for heavy-duty commercial-grade gear. This sulky is built to last years, not seasons, with a steel frame and robust latch mechanism.

Key Features Breakdown

• 18" Heavy Duty Lift and Latch Arm: This isn’t a flimsy plastic latch. The 18-inch arm lets you raise and lower the sulky deck easily, even with gloved hands, and the heavy-duty steel construction resists bending under repeated use. For operators moving between properties, this quick-latch system saves minutes per job.
• Compatibility with B1MS34, TS2006N, 42-066: This sulky is specifically designed for Bradley’s two-wheel mower models. Check your mower’s model number before buying—it’s not a universal fit. The direct attachment means no drilling or welding; it bolts on in about 20 minutes with basic tools.
• Sulky Platform (riding plate): The platform is wide enough for a comfortable stance (roughly 14x18 inches) and has a non-slip surface. It’s not cushioned, but it absorbs vibration better than standing on a mower deck. Expect a stable ride at walking speeds up to 4 mph.
• Steel Frame Construction: The frame is powder-coated to resist rust and scrapes from rocks or curbs. At roughly 35 pounds, it’s hefty but not unmanageable—one person can mount it with a little muscle.
• No Suspension: This is a trade-off. The rigid design keeps the sulky low-profile and durable, but you’ll feel bumps more than on a cushioned zero-turn seat. For smooth lawns, it’s fine; for rutted fields, your knees will notice.

Pros

1. Massively reduces operator fatigue: After a full day of mowing, your legs and lower back will thank you. Riding instead of walking cuts physical strain by at least 50% on flat ground.
2. Affordable upgrade path: At $420, it’s roughly a quarter the cost of a new ride-on mower. If you already own a compatible Bradley, this is the most cost-effective way to go from walking to riding.
3. Quick attachment and detachment: The lift-and-latch arm lets you switch between walking and riding modes in under a minute. Useful for tight areas where you want to dismount and walk the mower.
4. Built to commercial standards: The steel frame and heavy-duty latch are overbuilt for residential use. Expect 5-10 years of service with basic maintenance (keeping bolts tight and lubricating the latch).
5. Maintains mower maneuverability: Unlike adding a bulky seat, this sulky keeps your mower’s turning radius tight. You can still trim around trees and flower beds without dismounting.
6. Simple installation: No special tools or modification needed. Bolts directly to the mower frame using existing holes. Clear instructions are included.

Cons

1. Rough ride on uneven terrain: With no suspension, every bump and dip translates directly to your feet. For lawns with gopher holes, roots, or heavy thatch, expect a jarring experience.
2. Not for steep slopes: The sulky adds weight behind the mower, which can reduce traction on hills. If your lawn has grades over 15 degrees, you may feel unsafe or struggle with steering.
3. Limited compatibility: Only fits specific Bradley models (B1MS34, TS2006N, 42-066). If you have a different brand or model, this won’t work without major modification—check your mower’s manual first.
4. Feet can get tired from standing: Unlike a seated sulky, you’re standing the whole time. For some users, this is still less tiring than walking, but it’s not a zero-effort ride. Your calves and arches may ache after 2+ hours.

Bottom Line

The Bradley Mowers Two Wheel Mower Sulky with 18" Heavy Duty Lift and Latch Arm is a solid, well-built attachment that delivers exactly what it promises: a way to ride instead of walk behind your two-wheel mower. It’s not a luxury ride—you’ll feel bumps, and it’s only for compatible Bradley models—but for the price, it’s a smart investment for anyone mowing over an acre regularly. The 3.5-star rating reflects that it’s a niche product; it’s not for everyone, but for the right user (flat terrain, compatible mower, tired legs), it’s a 5-star upgrade. I recommend it for pros and homeowners who already own a Bradley and want to save their back without spending thousands on a new machine. Just be realistic about your terrain—this sulky loves smooth lawns but hates rough ones.

Frequently Asked Questions

Will this fit my Bradley mower if I don’t know the model number?
Check the sticker on your mower’s frame near the engine or handlebars. It should list the model number (e.g., B1MS34). This sulky only fits models TS2006N, 42-066, and B1MS34. If you have a different model, contact Bradley directly with your serial number—they may have a different sulky option.

Can I install this myself, or do I need a mechanic?
You can install it yourself with basic hand tools (wrenches and a socket set). The process takes about 20-30 minutes. The instructions are clear, and the bolts line up with existing holes on the mower. No