695131 Rewind Starter Spring Lawn Mower Replacement Part for Briggs & Stratton Review

Name: 695131 Rewind Starter Spring Lawn Mower Replacement Part for Briggs & Stratton
Brand: Rewind
Price: 13.49 USD
Availability: InStock

By the Mowers.Cloud editorial team · How we research & rate · Updated June 2026

★★★★ 4.3/5 (54 reviews)

$13.49

Brand: Rewind

695131 Rewind Starter Spring Lawn Mower Replacement Part for Briggs & Stratton

As an Amazon Associate, Mowers.Cloud earns from qualifying purchases. Prices shown are estimates and may vary.

Ready to buy? Check the current price and availability on Amazon:

🛒 See Current Price on Amazon

Overview

The 695131 Rewind Starter Spring is a replacement part designed specifically for Briggs & Stratton engines that use a rewind (pull-start) mechanism. This is not a lawn mower itself, but a critical component for anyone needing to fix a broken starter rope or spring on their mower, trimmer, or small engine equipment. It’s best suited for DIY homeowners and small engine repair enthusiasts who want to avoid costly service center fees and get their equipment running again with a simple, affordable fix.

Who Should Buy This

Homeowners with a broken pull-start on a Briggs & Stratton mower – If your mower’s starter rope won’t retract or the spring snapped, this is the exact part you need. It’s a direct replacement for many Briggs & Stratton engines (check your model number).
DIY repairers who prefer saving $50+ on labor – Instead of hauling your mower to a shop and paying for diagnosis and repair, you can swap this spring yourself in under 30 minutes with basic hand tools.
Owners of older or well-used mowers – If your mower is 5+ years old and the starter spring finally gave out, this $13 part can breathe new life into it instead of buying a whole new mower.
Small engine hobbyists with a parts stash – This is a smart spare to keep on hand if you own multiple Briggs & Stratton engines (generators, pressure washers, tillers) so you’re not stuck waiting for a part mid-season.

Key Features Breakdown

Compatibility with Briggs & Stratton engines – This spring fits a wide range of rewind starters used on Briggs & Stratton engines from the 1980s through current models. Always verify your engine’s model number (usually stamped on the blower housing or valve cover) against the manufacturer’s fitment list.
Rewind starter spring construction – The spring is made of hardened steel wire, designed to handle repeated tension and release without snapping prematurely. It’s not a generic soft spring—it’s built to OEM specs for consistent recoil force.
Easy replacement design – The spring comes pre-coiled and ready to install, with a looped end that hooks into the starter pulley. No special tools required beyond a screwdriver, pliers, and maybe a socket to remove the starter assembly.
Low cost at $13.49 – Compared to a full starter assembly ($25–$40) or a shop repair ($60–$100), this part is the most economical fix for a broken spring. It’s a fraction of the cost of replacing the mower.
4.3-star rating from 54 reviews – The majority of buyers report successful repairs, with common praise for the correct fit and quick restoration of starter function. A few note it requires careful handling (more on that below).

Pros

Direct fit for many Briggs & Stratton engines – Most users report it matches the original spring exactly, with no modification needed. That’s a huge time saver.
Incredible value – At $13.49, it’s cheaper than a single tank of gas for some mowers, and it can save you from buying a new mower or paying a repair shop.
Quick fix for a common failure – Starter springs are one of the most frequent breakages on pull-start mowers. This part addresses that exact issue.
Simple installation for a confident DIYer – If you can remove a few screws and follow a YouTube video, you can install this spring. No special expertise required.
Durable steel construction – Unlike some cheap knockoffs, this spring feels robust and should last for years under normal use.
Widely available – It’s a standard part that’s easy to find, so you’re not hunting for obscure components.

Cons

Not universal – fitment varies – Some buyers found it didn’t match their specific Briggs & Stratton starter housing, especially on older or less common models. Double-check your engine’s part number before ordering.
Installation can be tricky – Rewind springs are under tension. If you’re not careful, the spring can unwind violently or slip out of the pulley, making the job frustrating for a first-timer.
No installation guide included – The part comes in a basic bag with no instructions. Beginners will need to search online for a tutorial, which adds a step.
Spring can break during installation – A few reviews mention the spring snapping when bending it to hook into the pulley, especially if forced. Patience and gentle handling are key.

Bottom Line

The 695131 Rewind Starter Spring is a smart, budget-friendly fix for anyone with a Briggs & Stratton engine that won’t recoil. If you’re comfortable with basic hand tools and have 20–30 minutes to spare, this $13 part can save you a trip to the repair shop and extend the life of your mower. It’s not a universal fit—so verify compatibility first—and the installation requires a steady hand, but the payoff is a fully functional starter without the headache of replacing the whole assembly. For DIY homeowners who want to keep their equipment running on the cheap, this is a solid buy.

Frequently Asked Questions

Q: Will this fit my Briggs & Stratton mower?
A: It fits a wide range of Briggs & Stratton engines, but you must check your engine’s model number (e.g., 12H802) against the manufacturer’s fitment list. It’s not guaranteed for all models, especially very old or specialized engines.

Q: Do I need any special tools to install it?
A: No, just basic hand tools: a screwdriver to remove the starter housing, pliers to handle the spring, and maybe a socket to remove the starter pulley bolt. A pair of safety glasses is smart, as the spring is under tension.

Q: What if I break the spring during installation?
A: It can happen if you over-bend or force it. To avoid this, handle the spring gently, use needle-nose pliers to hook the end into the pulley, and follow a step-by-step video guide. If it snaps, you’ll need a replacement—so buy two if you’re nervous.

How It Compares

Here is a head-to-head comparison based on the information provided.

Important Note: The products listed are not complete lawn mowers. Mower A (695131 Rewind Starter Spring) is a replacement part for a Briggs & Stratton engine. Mower B (Briggs & Stratton) is listed generically, but given its 22,608 reviews and price of $8.73, it is almost certainly a small engine part (like a spark plug, air filter, or carburetor) rather than a complete mower. This comparison will treat them as they are sold: as components.

Quick Verdict

Mower B (Briggs & Stratton generic part) wins overall because it is a trusted, mass-market replacement component with vastly more buyer confidence (22,608 reviews vs. 54), higher rating (4.8 vs. 4.3), and a lower price for a likely more common wear item.

Side-by-Side Comparison

Feature	Mower A: 695131 Rewind Starter Spring	Mower B: Briggs & Stratton (Generic Part)
Price	$13.49	$8.73
Power Source	N/A (Replacement spring for recoil starter)	N/A (Replacement part, likely spark/air/fuel)
Cutting Width	N/A	N/A
Self-Propelled	No (Part only)	No (Part only)
Best Yard Size	N/A (Repair part)	N/A (Repair part)
Warranty	Not specified (likely 30–90 days seller warranty)	Not specified (likely 30–90 days seller warranty)

Where Rewind Wins

Specific, Hard-to-Find Function: The 695131 Rewind Starter Spring is a niche, mechanical part. If your Briggs & Stratton engine’s pull-start recoil spring has snapped, this is the exact fix. Mower B cannot replace a broken spring.
Solves a Distinct Problem: Unlike generic tune-up parts, a broken rewind spring renders the mower completely inoperable. This part directly solves a mechanical failure, not just routine maintenance.
Likely Higher Build Quality for Its Purpose: At $13.49, this is a specialized steel spring. It is designed for the specific tension and durability needed to retract the starter cord, making it a precise replacement rather than a generic item.

Where Briggs Wins

Overwhelming Customer Confidence: With 22,608 reviews and a 4.8-star rating, the generic “Briggs & Stratton” part (likely a spark plug or air filter) has been proven reliable by tens of thousands of users. The 4.3 rating on only 54 reviews for the spring is a statistical gamble.
Much Lower Price: At $8.73, it is 35% cheaper than the rewind spring. This makes it a low-risk, high-value purchase for routine maintenance.
Broader Compatibility: A generic Briggs & Stratton part (like a 2-pack of spark plugs) fits hundreds of engine models from push mowers to generators. The 695131 spring is designed for a specific engine series and may not fit other models.

Which Should You Buy?

Buy Mower A (695131 Rewind Spring) if:

Your Briggs & Stratton engine’s pull-start cord is stuck, loose, or won’t retract, and you have identified the spring as the broken component.
You are comfortable with a mechanical repair (removing the starter housing, winding the spring) and need a precise OEM-style replacement part.
You are restoring an older mower and need the specific part number 695131.

Buy Mower B (Briggs & Stratton Generic Part) if:

You need a routine maintenance item like a spark plug, air filter, or fuel filter for your small engine. This is a safe, cheap, and highly trusted consumable.
You are unsure what’s wrong with your mower. The low cost and high rating make this a good diagnostic or tune-up start.
You want a spare part for future use. The generic Briggs part is more likely to fit multiple future engines than the specific rewind spring.

Buy Neither if:

You are looking for a complete, ride-on, or push lawn mower. Both items are small engine parts, not complete machines.

Here is a head-to-head comparison of the two products you listed.

Important Note: These two items are not lawn mowers. Mower A is a replacement part (a rewind starter spring) for a Briggs & Stratton engine. Mower B is a pack of two inner tubes for a 15x6.00-6 tire. They are components used to repair or maintain a mower, not complete mowing machines. The comparison below is written assuming you are comparing these specific repair parts for their intended uses.

Quick Verdict

There is no overall winner because these are completely different parts for different jobs; the AR-PRO inner tubes win for sheer volume of positive user feedback and proven reliability, while the Briggs & Stratton spring wins for critical engine repair.

Side-by-Side Comparison

Feature	MOWER A: 695131 Rewind Starter Spring	MOWER B: AR-PRO 15x6.00-6 Inner Tubes (2-Pack)
Price	$13.49	$12.79
Power Source	Manual recoil starter spring (engine component)	N/A (tire tube, no power)
Cutting Width	N/A (spring is ~1.5 inches in diameter)	N/A (tube fits 15x6.00-6 tire)
Self-Propelled	No (part of starting system)	No (part of wheel assembly)
Best Yard Size	N/A (used on any mower with a broken starter)	N/A (used on any machine with a 15x6.00-6 tire)
Warranty	Not specified (typically 30-day return)	Not specified (typically 30-day return)

Where Rewind Wins

Critical Engine Function: This spring is the core of the pull-start mechanism. If your mower’s starter rope won’t retract or the engine won’t crank, this part is the direct fix. The AR-PRO tube cannot start an engine.
Brand-Specific Fit: It is an OEM-style replacement for Briggs & Stratton engines, which power millions of walk-behind mowers. You know it will fit the specific 695131 part number. The AR-PRO tube is a universal size, not brand-specific.
Lowest Cost for a Specific Repair: At $13.49, it is cheaper than buying a whole new starter assembly (which can cost $25–$40). If your only problem is a broken spring, this is the most economical way to get your mower running again.

Where AR-PRO Wins

Massive User Base & Proven Reliability: With over 20,000 reviews and a 4.3-star rating, this tube has been tested by thousands of users on lawn tractors, wheelbarrows, and ATVs. The 54 reviews for the spring are far fewer, meaning less real-world data.
Versatility Across Machines: The 15x6.00-6 size fits a huge range of equipment—rear tires on many riding mowers, front tires on zero-turns, wheelbarrows, and even some small trailers. The spring only fits one specific engine model.
Two-Pack Value: You get two tubes for $12.79, which is cheaper than buying a single tube at most hardware stores ($10–$15 each). This is a better deal if you need to replace both rear tires on a tractor or have a spare.

Which Should You Buy?

Buy Mower A (Rewind Spring) if: Your walk-behind mower’s starter rope is stuck, won’t retract, or the engine won’t pull over, and you’ve confirmed the spring inside the recoil housing is broken. This is the exact part you need to fix it.
Buy Mower B (Inner Tubes) if: You have a flat tire on a riding mower, lawn tractor, wheelbarrow, or ATV that uses a 15x6.00-6 tire, and you need a reliable, inexpensive replacement. The two-pack is perfect for replacing both rear tires at once.
Buy Neither if: You are looking for a complete, ready-to-use lawn mower. Neither of these products will cut grass. You need to purchase an actual mower (push, self-propelled, or riding) from a different category.