6083 60 Inch Mower Replacement Blade for Bad Boy 038-2007-00, 038-6050-00, 038-6060-00, Zero Turn Mower, Fits for ZT, CZT, Maverick, Pup Series, 20-1/2" Length 2-1/2" Width, 3 Pack Review

Overview

If you own a Bad Boy zero-turn mower from the ZT, CZT, Maverick, or Pup series, the 6083 60-inch replacement blade set is a direct-fit, three-pack solution that saves you time and money compared to buying OEM blades individually. Designed for commercial-grade cutting on larger properties, these 20.5-inch blades with a 2.5-inch width deliver the same aggressive lift and clean cut as the factory originals, but at a fraction of the price. Whether you’re mowing five acres or maintaining a pristine two-acre lawn, this set is aimed at Bad Boy owners who want reliable performance without the dealer markup.

Who Should Buy This

Bad Boy zero-turn owners with 60-inch decks – This is the obvious fit. If you’ve got a ZT, CZT, Maverick, or Pup series mower, these blades match Bad Boy part numbers 038-2007-00, 038-6050-00, and 038-6060-00. No modifications needed.

Property owners mowing 2+ acres – The 60-inch cutting width and three-blade design mean you’ll cover ground quickly. These blades are built for speed and durability, not for tiny postage-stamp lawns.

Budget-conscious buyers who refuse to pay OEM prices – Bad Boy factory blades can run $25–$35 each. This three-pack comes in under $40 total. If you sharpen your own blades and replace them in sets, you’ll save significantly over time.

DIY mechanics who value exact fit – These blades are listed as direct replacements with the correct center hole, oval drive hole, and overall dimensions. If you hate fighting with blades that don’t line up or require grinding to fit, this set eliminates that frustration.

Key Features Breakdown

20.5-inch length, 2.5-inch width – These are full-size commercial blades, not economy “mulching” blades that sacrifice lift. The 2.5-inch width provides enough surface area for good suction, which is critical for bagging or side-discharging wet grass. The length matches Bad Boy’s OEM spec exactly, so you won’t have overhang or gap issues on your 60-inch deck.

Three-pack value – Most mowers require three blades for a full deck swap. Buying a three-pack means you replace all blades at once, ensuring uniform sharpness and balance. Mixing old and new blades leads to uneven cuts and vibration. This set encourages proper maintenance.

OEM cross-reference compatibility – Covers Bad Boy part numbers 038-2007-00, 038-6050-00, and 038-6060-00. These are common across the ZT, CZT, Maverick, and Pup lines. If your model uses any of these, you’re good to go. Always double-check your deck’s blade pattern, but the cross-reference is accurate for the listed models.

Steel construction with heat treatment – These are not stamped sheet metal blades. They’re made from hardened steel that holds an edge longer than cheap alternatives. Expect 20–30 hours of mowing before noticeable dulling, depending on grass conditions and debris.

Center hole and drive hole dimensions – The center hole is 1-inch diameter, with a 5/16-inch oval drive hole. This matches Bad Boy’s spindle design. If you’ve ever tried to force a blade with mismatched drive holes, you know how frustrating and dangerous that can be. These fit without slop.

Pros

1. Direct fit for multiple Bad Boy models – No filing, no drilling, no cursing. Install them and go.
2. Exceptional value – Under $13 per blade is half the price of OEM equivalents. For a three-pack, that’s a no-brainer.
3. Good lift for bagging and discharge – The blade profile creates strong suction, even in thicker grass. Your clippings won’t clump.
4. Heat-treated steel holds up – These blades resist bending on rocks and roots better than budget brands. Not indestructible, but tough.
5. Uniform sharpness out of the box – All three blades are balanced and sharp. No need to spend time honing before first use.
6. Reduces maintenance frequency – Replacing all three at once means your deck stays balanced, reducing vibration and spindle wear.

Cons

1. Not a mulching blade – These are standard lift blades. If you want a true mulching blade with a curved wing or serrated edge, look elsewhere. They’ll chop clippings, but not as finely as dedicated mulchers.
2. No coating for rust resistance – Unlike some premium blades with paint or powder coating, these are bare steel. They’ll rust if you leave them wet. Wipe them down after washing your deck.
3. Limited compatibility – Only fits Bad Boy models with the specific part numbers listed. If you have a different brand or an older Bad Boy with a non-standard deck, measure first.
4. Two reviews means limited long-term data – The 5.0 rating is promising, but with only two reviews, you’re relying on the cross-reference and build quality rather than a large sample size.

Bottom Line

The 6083 60-inch replacement blade set is a smart, budget-friendly choice for Bad Boy zero-turn owners who want OEM-level performance without the dealership price tag. If you mow two acres or more and replace blades in sets, this three-pack will save you $40–$60 over buying singles. The fit is exact, the lift is solid, and the steel is tough enough for normal residential and light commercial use. The only reason to skip these is if you specifically need mulching blades or if your mower uses a different part number. For everyone else with a ZT, CZT, Maverick, or Pup series 60-inch deck, this is a straightforward, high-value buy. Keep a spare set on hand, sharpen the old ones, and rotate them in seasonally.

Frequently Asked Questions

Q: Will these fit my Bad Boy ZT Elite 60-inch deck?
A: Yes, if your ZT Elite uses OEM part number 038-2007-00, 038-6050-00, or 038-6060-00. Check your owner’s manual or the blade currently installed. Most 60-inch Bad Boy decks from 2010 onward use these blades, but always verify the part number before ordering.

Q: Can I use these for mulching?
A: They will cut grass and return clippings, but they are not dedicated mulching blades. If you want fine, dust-like clippings that disappear into the lawn, you’ll need a mulching blade with a curved wing or a gator-style design. These are better for side discharge or bagging.

Q: How often should I replace these blades?
A: For most homeowners mowing 2–3 acres, replace them once per season or after 30–40