532415598 Lawn Mower Washout Port Compatible with Husqvarna 2042 LS,2246LS,2346XLS, Craftsman,Poulan,Jonsered,Lawn Mower Deck Parts（2 Pack） Review

Overview

This 532415598 lawn mower washout port kit (2-pack) is a simple but effective deck cleaning accessory designed for Husqvarna, Craftsman, Poulan, and Jonsered mowers with 42-inch or similar cutting decks. It’s not a mower itself, but a replacement part that lets you attach a garden hose directly to your mower deck to blast away grass clippings and debris. Priced at $14.89 with a solid 4.2-star rating from 28 reviews, it’s best for owners of these specific models who want to extend deck life and reduce rust without crawling under the mower with a scraper.

Who Should Buy This

• Homeowners with Husqvarna 2042LS, 2246LS, or 2346XLS mowers – If you own one of these exact models, this kit is a direct fit and saves you from hunting for a universal part that might not seal properly.
• DIYers who hate manual deck scraping – If you’re tired of spending 20 minutes after each mow scraping caked-on grass from under the deck, this port lets you clean in under 2 minutes with a hose.
• Owners of Craftsman, Poulan, or Jonsered 42-inch deck mowers – The compatibility list is broad, so if you have a similar deck from these brands, this 2-pack gives you a spare or allows you to outfit two mowers.
• Budget-conscious buyers who want a low-cost maintenance upgrade – At under $15 for two ports, it’s a cheap way to keep your deck cleaner and reduce rust, especially if you mow damp grass that clings to the underside.

Key Features Breakdown

• Compatibility with Husqvarna 2042LS, 2246LS, 2346XLS, Craftsman, Poulan, Jonsered – This is the big one. The kit is engineered for specific mounting holes and deck shapes on these models, so you won’t need to drill or modify anything. If your mower isn’t listed, measure your deck’s port hole (typically 1-inch diameter) to confirm fit.
• 2-Pack Design – You get two ports in the box, which is handy if you have two mowers or want a backup. Some buyers report that one port lasts a season or two before the plastic cracks, so the spare is useful.
• Simple Installation – The port screws into an existing threaded hole on your mower deck. No tools beyond a wrench or pliers are needed, and most users report a 5-minute install. The included O-ring helps create a watertight seal.
• Hose Connector – The port accepts a standard garden hose quick-connect or threaded fitting. You attach the hose, turn on the water, and run the mower blades to spin water across the deck underside for cleaning.
• Plastic Construction – The port is made of durable plastic, not metal. This keeps the price low and prevents corrosion, but it’s less impact-resistant than brass fittings. Avoid overtightening to prevent cracking.

Pros

1. Fast, effective cleaning – With the blades spinning, water flings across the entire deck underside, removing wet clippings and mud in under 2 minutes. This beats scraping by a mile.
2. Tool-free operation – Once installed, you just snap on a hose and pull the mower’s start cord. No crawling under the deck or using a putty knife.
3. Affordable 2-pack value – At $14.89 for two ports, it’s cheaper than many single-port kits. The spare gives you peace of mind if one fails.
4. Direct fit for popular models – If you have a Husqvarna 2042LS or similar, this installs without drilling or adapters. The seal is tight when properly tightened.
5. Reduces deck rust and clumping – Regular cleaning prevents grass buildup that traps moisture against the steel deck. This extends the life of your mower deck, especially in humid climates.
6. Lightweight and easy to store – The ports are small and won’t clutter your garage. They’re also easy to remove and store if you don’t want them on the mower year-round.

Cons

1. Plastic can crack if overtightened – A handful of reviews mention the port breaking when tightened too much with a wrench. Hand-tighten plus a quarter turn is enough; use Teflon tape on the threads for a better seal.
2. Not universal – check your deck hole first – If your mower isn’t on the compatibility list, the port might not fit. Measure the hole diameter (likely 1 inch) and thread pitch before buying. Some users with older Craftsman models found the threads didn’t match.
3. Water pressure can be weak on some hoses – The cleaning effectiveness depends on your hose’s water pressure. If you have low pressure or a long hose, the water won’t blast clippings off as well, and you may still need to scrape stubborn spots.
4. Nozzle direction is fixed – The port sprays water in one direction (usually toward the discharge chute). It doesn’t cover the entire deck evenly, so some areas may need manual attention after cleaning.

Bottom Line

If you own a Husqvarna 2042LS, 2246LS, 2346XLS, or a compatible Craftsman/Poulan/Jonsered mower, this 2-pack washout port is a no-brainer upgrade for under $15. It makes deck cleaning fast, easy, and less messy, which directly reduces rust and keeps your mower cutting cleanly. The plastic construction is a minor durability concern—don’t overtighten it—but the value of having a spare port and the simplicity of installation outweigh that. I recommend buying this kit if you mow at least once a week and want to extend your deck’s life without spending on a pressure washer or hours scraping. For owners of non-listed mowers, measure first or look for a universal metal port instead.

Frequently Asked Questions

Will this fit my Craftsman mower with a 46-inch deck?
It’s designed for 42-inch decks on specific Husqvarna and Craftsman models. If your Craftsman has a 46-inch deck, the port hole size and thread pitch may differ. Measure your deck’s existing port hole—if it’s 1 inch in diameter with standard pipe threads, it might work, but check compatibility with your model number first.

How do I install this without cracking the plastic?
Hand-tighten the port into the deck hole until snug, then give it a quarter turn with a wrench. Don’t use excessive force. Apply plumber’s Teflon tape to the threads before installation to improve the seal and reduce the risk of overtightening.

Can I use this with a pressure washer instead of a garden hose?
Not recommended. The plastic port isn’