ZT1 54" Mower Blades 942-05056A Fit for Cub-Cad et RZT-L54, ZT2-54 XT1-54 XT2-54, Medium Lift Blade Replace for 742-05056, 742-05056A, 942-05056, 3 Pack

What It Is

This is a 3-pack of medium-lift replacement blades designed for 54-inch Cub Cadet ZT1, ZT2, XT1, and XT2 zero-turn mowers. They’re meant for standard residential mulching and bagging—not for heavy commercial use.

Fitment & Compatibility

Before buying, confirm three things:

• Deck size: Only fits 54-inch decks. Measure your deck width end-to-end; 54" is common on Cub Cadet ZT1, ZT2, XT1, and XT2 models. Also fits RZT-L54.
• OEM numbers: Replaces 742-05056, 742-05056A, 942-05056, and 942-05056A. If your blade has a different number, it likely won’t match.
• Blade dimensions: Each blade is 18.5 inches long, 2.5 inches wide, with a 5-point star center hole and 0.5-inch thickness. Measure your old blade’s length, width, and hole shape to verify.

Warning: These are aftermarket blades. They may be slightly thinner or lighter than OEM. Check that the star pattern matches your spindle—some Cub Cadet decks use a different drive pattern.

Key Things to Know

• Quality vs. OEM: These are mid-grade steel. They’ll dull faster than factory blades, especially on sandy or rocky lawns. Expect 2-3 seasons of light use before replacement.
• Installation: Easy if you have a socket wrench and a block of wood to jam the blade. Torque to 70-90 ft-lbs. Reverse-thread on some spindles—check your manual.
• Balance: Out of the box, some users report slight imbalance. Test by hanging the blade on a nail; if one side drops, file the heavy side until it balances.
• Common gotcha: The 5-point star hole is not universal. Some Cub Cadet decks use a 3-point or 4-point pattern. Visually compare your old blade’s hole before buying.

Should You Buy It

If you have a 54-inch Cub Cadet ZT1, ZT2, XT1, or XT2 and want a budget-friendly 3-pack for routine mowing on average grass, this is a solid value. Skip it if you need OEM durability, have a different deck size, or mow heavy/wet conditions—go with factory blades instead.