ZMCYNG 594062 Recoil Starter Pull Start Assembly, 594062 Rewind Starter Fits 093J02 103M02 103M05 104M02 103M0B Lawn Mower Rewind Recoil Starter (Black)

What It Is

This is a complete recoil starter assembly (pull-start mechanism) for small engines, typically used on walk-behind lawn mowers. It replaces a broken or worn-out starter that won’t retract or engage the engine.

Fitment & Compatibility

• Direct fit for these engine models: Briggs & Stratton 093J02, 103M02, 103M05, 104M02, 103M0B. Also fits many other B&S engines with the same bolt pattern.
• Check bolt spacing: Measure center-to-center distance of the two mounting holes on your old starter. This unit uses a 3-1/4” (82.5mm) bolt pattern.
• Verify rope length: The included rope is ~48 inches. If your engine requires a longer or shorter rope, you’ll need to swap it.
• OEM vs aftermarket: This is a non-OEM (aftermarket) part. It matches the function of the genuine B&S 594062 but may have slight differences in plastic feel or spring tension.
• Not universal: It will not fit Honda, Kohler, Tecumseh, or other non-Briggs engines without modifying.

Key Things to Know

• Installation difficulty: Easy (15-20 minutes). You only need a screwdriver and possibly a socket for the center bolt. No special tools.
• Quality note: Rated 4.2/5. Some users report the spring tension is slightly lighter than OEM, but it works reliably for most residential mowers.
• Common gotcha: The plastic housing can crack if overtightened. Use hand-tight plus 1/4 turn on bolts.
• Rope retraction: If the rope doesn’t retract fully, the spring may need pre-tensioning. Instructions are included, but check online videos if you’re unsure.

Should You Buy It

Buy this if you have a compatible Briggs & Stratton engine with a broken or weak recoil starter and want a budget-friendly replacement that’s easy to install. It’s best for residential mowers, not commercial or heavy-use machines. If you need exact OEM feel or warranty support, spend more on a genuine B&S part.