Youxmoto 131-4547-03 22 inch Medium Lift Mower Blades for Toro Recyclers Steel Decks 20016 20017 20332 20071 20330C 20065 Replaces 104-8697-03 108-9764-03 108-9764-02P, 3 Pack

What It Is

This is a set of three 22-inch medium lift mower blades designed for Toro Recycler models with steel decks. They are meant for standard residential mulching and bagging, offering a balance between lift and cutting efficiency for grass up to moderate height.

Fitment & Compatibility

• Deck size: Only fits 22-inch cutting decks. Measure your blade length before ordering; any other size will not work.
• Model fit: Confirmed for Toro Recyclers with steel decks, including models 20016, 20017, 20332, 20071, 20330C, and 20065. Check your model number on the mower’s serial plate.
• OEM vs aftermarket: Replaces Toro OEM part numbers 104-8697-03, 108-9764-03, and 108-9764-02P. These are non-OEM but match dimensions and center hole pattern.
• Measurements: Blade length 22 inches, center hole diameter 1 inch, with a 5-point star drive. Verify your mower uses a star drive (not a keyed or round hole) before buying.

Key Things to Know

• Installation difficulty: Easy – remove the old blade with a socket wrench, install new one with the lift wings pointing up toward the deck. Torque the bolt to 50-60 ft-lbs.
• Quality note: Blades are made from heat-treated steel but may be slightly thinner than OEM Toro blades. They work fine for average lawns but may wear faster in sandy or rocky conditions.
• Common gotcha: The medium lift profile is not ideal for thick, tall, or wet grass. If you often mow heavy growth, consider a high-lift blade instead.
• Pack size: Comes as a 3-pack, so you get spares or can replace all at once. Store extras dry to prevent rust.

Should You Buy It

This is a good value for Toro Recycler owners with steel decks who want a direct-fit, budget-friendly replacement for standard mulching and bagging. Skip it if you need heavy-duty blades for tough conditions or prefer OEM thickness.