Wheel Protector for Worx Landroid M500 M700 S300 M1000 Lawn Mower Wheel Protection Replacement Traction Enhancement Mower Accessories

What It Is

This is a set of wheel protectors designed to fit Worx Landroid robotic mowers. They snap over the existing wheels to improve traction on slopes, wet grass, or loose soil, and shield the wheel hubs from wear and debris.

Fitment & Compatibility

• Exact models: Confirmed for Worx Landroid M500, M700, S300, and M1000. Not for other Landroid series (e.g., M, WG series) without checking wheel diameter.
• Wheel size: These fit wheels with an outer diameter of approximately 4.5 inches (115mm) and a hub width of about 1.5 inches (38mm). Measure your wheel’s outer diameter and hub width before ordering—some older or newer models may vary.
• OEM vs aftermarket: These are aftermarket accessories, not Worx-branded. They should not interfere with the mower’s charging or boundary wire detection if installed correctly.
• What to check: Ensure your mower has standard rubber wheels (not tracks) and that the wheel studs/axles are not damaged. If your wheels are worn or cracked, replace them first.

Key Things to Know

• Installation: Snap-on design, no tools required. Takes about 2 minutes per wheel. Ensure they click fully into place—loose fit can cause them to fall off on rough terrain.
• Traction gain: Noticeable improvement on moderate slopes (up to 25°). On very steep or muddy lawns, they help but won’t eliminate slipping entirely.
• Durability: Made from hard plastic. They’ll wear over time on abrasive surfaces (concrete, asphalt) but last several seasons on grass.
• Gotcha: If your mower’s wheel studs are heavily rusted or bent, the protectors may not seat properly. Also, they add a small amount of width—check that your mower still clears narrow passages (e.g., gate openings) after installation.

Should You Buy It

Buy these if your Landroid struggles with traction on slopes or soft ground, or if you want to protect the original wheel hubs from premature wear. They’re cheap, easy to install, and work well for the listed models. Skip them if your lawn is flat and dry, or if your wheels are already in poor condition—replace the wheels first.