WANDA Lawn Mower Tractor Tire Wheel Assembly 20X10-8 4-Ply with 4 Lugs on 4" PCD Silver Wheel-13071,SET 2

What It Is

This is a pair of WANDA 20x10-8 lawn tractor rear tires mounted on silver steel wheels with a 4-lug, 4-inch PCD pattern. Designed for riding mowers and garden tractors needing replacement rear tires for traction and support.

Fitment & Compatibility

Before buying, verify these four measurements:

• Tire size: 20x10-8 (20" diameter, 10" wide, 8" rim). Measure your existing tire sidewall.
• Bolt pattern: 4 lugs on a 4-inch PCD (center-to-center across opposite lugs). Common on many Craftsman, Husqvarna, MTD, and John Deere models, but not universal.
• Center hole: Must clear your axle hub. If your tractor has a smaller or larger hub, this wheel may not fit.
• Offset/backspacing: This wheel has a 3+5/8" backspacing. Check clearance against your mower deck and frame.

Compare your OEM part number (e.g., Husqvarna 532138207, MTD 734-04135) to this set. Not a direct OEM replacement for all brands—measure first.

Key Things to Know

• 4-ply rating: Good for residential use on flat to moderate terrain. Not for heavy commercial or rocky slopes—sidewalls are less puncture-resistant than 6-ply.
• Installation difficulty: Easy if you have a jack, lug wrench, and basic tools. No balancing needed. Torque lugs to 35-50 ft-lbs.
• Common gotchas: Valve stem position may conflict with your brake or deck if offset is tight. Check before inflating. Also, silver steel wheels may rust faster than painted black ones in wet conditions.
• No tire pressure sensor: Use standard air or nitrogen. Recommended pressure is 14-18 PSI—do not exceed 20 PSI.

Should You Buy It

Buy this set if you need a budget-friendly, direct-fit rear tire replacement for a residential riding mower with a 4x4" bolt pattern and your current tires are worn or damaged. Skip it if you have a 5-lug pattern, need a 6-ply tire for rough ground, or want a painted wheel that resists rust better. Measure twice, order once.