Wadoy 72531-VE2-020 72511-VE1-020 Twin Blade Set, HRR216 HRM215 Series Blade Kit with 17211-ZS9-A02 Air Filter and BPR5ES Spark Plug for 21" MicroCut Twin Blade Set and EB2500C EB3000C EM3000C EU3000

What It Is

This is a complete blade service kit for select Honda 21" walk-behind mowers and generators. It includes two MicroCut twin blades (72531-VE2-020 and 72511-VE1-020), a foam air filter (17211-ZS9-A02), and a BPR5ES spark plug, covering both cutting and maintenance needs in one bundle.

Fitment & Compatibility

• Mowers: Fits Honda HRR216 (all series: K9, TDA, VKA, VLA, VYA) and HRM215 (all series: PDA, PHA, SDA, SXA). Also fits 21" MicroCut twin blade decks.
• Generators: Works with Honda EB2500C, EB3000C, EM3000C, EU3000 (air filter and spark plug only).
• Critical checks: Measure your blade bolt pattern—these use a 15mm center hole with an 83mm pin-to-pin offset. Confirm your deck is 21" and uses twin overlapping blades (not single blade). Air filter and spark plug are universal fit for the listed generators; verify your model’s engine code.
• OEM vs aftermarket: This is an aftermarket set. Expect slightly thinner steel than OEM Honda blades. Fitment is accurate, but balance may vary.

Key Things to Know

• Blade quality: Steel is 0.1mm thinner than OEM—acceptable for grass, but avoid heavy debris or rocks. Sharpen before first use for best cut.
• Installation effort: Moderate. Requires removing the blade bolt (15mm socket) and center nut. Torque to 35-40 ft-lbs. Use a blade stop tool or block of wood to prevent spinning.
• Air filter note: The foam filter requires oiling before installation (not included). Use SAE 30 or filter oil for proper sealing.
• Spark plug gap: Pre-gapped at 0.030", but always verify with a feeler gauge. Wrong gap causes misfire on Honda engines.

Should You Buy It

This kit is a smart value if you need to refresh both blades and basic maintenance parts on a Honda HRR216 or HRM215 mower. It’s not for heavy commercial use—blade steel is thinner—but fine for residential lawns. Avoid if you want OEM-grade durability or own a different brand deck.