Terre 46" High-Lift Lawn Mower Blades 2-Pack, Fits Husqvarna YTH22V46 & Craftsman 46" Decks, Replaces 532405380, 405380, 403107 | 46" High-Lift Blades 2-Pack Fits YTH22V46 Replaces 532405380 405380 403107

What It Is

This is a 2-pack of 46-inch high-lift lawn mower blades designed for increased airflow and suction, ideal for bagging grass or leaves. They fit Husqvarna YTH22V46 and Craftsman 46-inch decks, replacing OEM part numbers 532405380, 405380, and 403107.

Fitment & Compatibility

Before buying, confirm these three things:

• Deck size: Must be exactly 46 inches (measured cutting width). Measure diagonally across the blade mounting holes if unsure.
• Model number: Works on Husqvarna YTH22V46 and Craftsman models with a 46-inch deck (e.g., 917.xxxxx series). Check your mower’s model plate under the seat or on the frame.
• OEM vs aftermarket: These are aftermarket replacements. Verify your current blade’s part number (stamped on the blade) matches 532405380, 405380, or 403107. Also measure the center hole diameter (typically 7/8-inch) and blade length (20 inches end-to-end).

Key Things to Know

• Installation: Simple swap with a socket wrench. Lift the deck, block the blade, and remove the bolt. Torque to 70-80 ft-lbs when reinstalling.
• High-lift design: Increases suction for bagging but may cause more wear on the engine and deck if used for mulching. Not ideal for dry, dusty conditions.
• Durability: Heat-treated steel with a painted finish. Expect 25-50 hours of cutting before sharpening, depending on lawn debris.
• Balance check: Always test blade balance after mounting (use a blade balancer). An unbalanced blade vibrates and can damage the spindle.

Should You Buy It

Buy this if you have a Husqvarna YTH22V46 or Craftsman 46-inch deck, need a reliable high-lift blade for bagging or leaf collection, and want a cost-effective alternative to OEM. Skip it if you primarily mulch or have a smaller/odd-sized deck.