Swisher 9008 OEM Plate Blade Mount. Original Equipment Manufactured

What It Is

The Swisher 9008 OEM Plate Blade Mount is a factory replacement mounting bracket that secures the blade to the spindle on Swisher pull-behind and trail mowers. It’s designed for heavy-duty rough-cut mowing, like clearing fields or tall grass.

Fitment & Compatibility

• Deck size: Fits Swisher 44-inch, 50-inch, and 60-inch pull-behind mowers (models LCR1250, LCR1450, LCR1660, and similar).
• OEM vs aftermarket: This is Swisher’s original equipment – it matches factory specs exactly. Aftermarket mounts may vary in hole alignment or thickness.
• Measurements: Center hole diameter is 5/8 inch; bolt pattern is 4 holes on a 3-inch square. Verify your spindle bolt size (usually 5/8-18 or 3/4-10).
• Check before buying: Confirm your mower model number and that you need the mount, not just the blade. Also inspect your spindle for wear – a damaged spindle will ruin a new mount.

Key Things to Know

• Quality: Heavy-duty stamped steel, powder-coated to resist rust. Holds up well under constant rough cutting.
• Installation: Easy – remove the old mount, swap the blade, and bolt on the new one. Use a torque wrench (specs: 40-50 ft-lbs for spindle bolt).
• Common gotchas: The mount is sold individually, not as a set. If you have a twin-blade deck, you’ll need two. Also, the blade tip holes may not align with some aftermarket blades – stick with Swisher OEM blades for guaranteed fit.
• Wear check: Replace the mount if the blade bolt holes are elongated or if the mount is bent – a bent mount causes vibration and uneven cut.

Should You Buy It

Yes, if you own a Swisher pull-behind mower and need a direct OEM replacement for a worn or damaged mount. It’s affordable, reliable, and eliminates fitment guesswork. Skip it if you’re using a different brand mower – the bolt pattern and spindle size are Swisher-specific.