Stens Wheel 195-032 for Murray 8x1.75

What It Is

The Stens Wheel 195-032 is a replacement drive or front wheel for Murray lawn mowers, sized 8x1.75 inches. It’s designed for walk-behind mowers, especially older Murray models that use a 3/4-inch axle and a standard wheel hub.

Fitment & Compatibility

Before buying, verify these three things:

• Axle size: This wheel fits a 3/4-inch axle. Measure your mower’s axle diameter (not the shaft) to confirm.
• Bolt pattern: It uses a 4-bolt hub pattern with 2.5-inch center-to-center spacing. If your current wheel has a different pattern (e.g., 3-bolt or 2-inch), this won’t fit.
• Model check: Stens is an aftermarket brand, not OEM Murray. It’s compatible with many Murray mowers from the 1990s–2000s, but not all. Cross-reference your mower’s model number (stamped under the seat or on the deck) with Stens’ fitment list or measure your old wheel’s diameter and hub dimensions. Deck size (e.g., 20-inch or 22-inch) doesn’t directly affect wheel fitment, but larger decks often use larger wheels—so measure first.

Key Things to Know

• Quality: Stens is a reputable aftermarket brand. This wheel is solid rubber with a plastic hub—durable for normal use, but not heavy-duty.
• Installation: Easy. Remove the old wheel’s axle bolt and hub cap, slide off the old wheel, and mount the new one. No special tools needed.
• Common gotcha: The 4-bolt pattern is key—some Murray models use a 3-bolt or a different 4-bolt spacing. Double-check before buying.
• Price vs. OEM: At $14, it’s often cheaper than a genuine Murray wheel (which can run $20+). But if your mower is a newer model, OEM might fit better.

Should You Buy It

Buy this if you have an older Murray walk-behind mower with a 3/4-inch axle and a 4-bolt hub pattern, and you want a budget-friendly replacement. Skip it if your mower uses a different axle size or bolt pattern, or if you need a pneumatic tire (this is solid rubber). For most DIY repairs, it’s a solid, no-fuss choice.