Stens Recoil Starter 150-002 Compatible with/Replacement for Briggs & Stratton 093J02, 103M02 and 104M02 594062

What It Is

The Stens Recoil Starter 150-002 is a replacement pull-start assembly for small engines, specifically designed for Briggs & Stratton models 093J02, 103M02, and 104M02. It’s used on walk-behind mowers, pressure washers, and other compact power equipment where the original starter rope or mechanism has failed.

Fitment & Compatibility

Before buying, verify your engine’s model number (stamped on the blower housing or valve cover). This Stens unit directly replaces Briggs & Stratton part 594062 and fits engines in the 093J02, 103M02, and 104M02 series. It does not fit older Briggs engines with different mounting hole patterns or larger displacement models. Measure the bolt pattern: this starter uses two mounting holes spaced 3.25 inches apart center-to-center. Also check that your engine’s flywheel housing has a recessed area for this starter – some newer engines use a different tab design. If your engine model isn’t listed, measure the existing starter’s bolt spacing and compare to the Stens specs.

Key Things to Know

• Quality: Stens is a reputable aftermarket brand; the 150-002 is built to OEM specs with a steel housing and nylon pulley. It’s slightly less robust than genuine Briggs but reliable for residential use.
• Installation difficulty: Moderate. You’ll need a socket set and screwdriver. The hardest part is routing the rope through the pulley and handle – watch a video if you’re new to recoil starters.
• Common gotchas: The rope length is pre-cut (about 54 inches). If your original was longer, you may need to buy separate rope. Also, this starter comes with a new handle but no mounting bolts – reuse your old ones or buy M6x1.0 bolts if missing.
• Warranty: Stens offers a 1-year limited warranty, but you must buy from an authorized dealer to claim it.

Should You Buy It

Buy this if you have a compatible Briggs engine (093J02, 103M02, or 104M02) and want a cost-effective replacement that works out of the box. It’s ideal for DIY repairs on residential mowers where paying double for a genuine Briggs starter isn’t justified. Avoid it if you need a heavy-duty starter for commercial use or if your engine model isn’t listed – go OEM for guaranteed fit.