Stens New Lawnmower Blade 335-315 Replacement for: Snapper 28' Deck Rear Engine Rider 1-9515, 7019515, 7019515BMA, 7019515BZ, 7019515BZYP

What It Is

This is a replacement lawn mower blade (Stens 335-315) designed specifically for Snapper rear-engine riders with a 28-inch cutting deck. It’s a direct-fit aftermarket blade for mulching or standard cutting on residential mowers.

Fitment & Compatibility

Before buying, confirm three things:

• Deck size: This blade fits Snapper 28-inch decks only. Measure your deck width (blade tip to tip) to verify.
• Model numbers: Compatible with Snapper OEM part numbers 1-9515, 7019515, 7019515BMA, 7019515BZ, and 7019515BZYP. Check your mower’s model tag under the seat or on the frame.
• Measurements: Blade length is 28 inches, center hole diameter is 1 inch, and thickness is 0.1875 inches (3/16”). If your current blade matches these, it will fit.
• OEM vs aftermarket: Stens is an aftermarket brand, not OEM Snapper. It’s a quality replacement but may differ slightly in steel hardness or coating.

Key Things to Know

• Installation difficulty: Easy—requires a socket wrench and a blade removal tool or block of wood to hold the blade. Torque bolts to 50-60 ft-lbs.
• Sharpness: Blades come unsharpened. You’ll need to sharpen them before first use (or run them dull for light grass).
• Balance: Stens blades are often well-balanced out of the box, but always check with a blade balancer after sharpening.
• Common gotcha: These are not for zero-turn or walk-behind mowers. Only fit Snapper rear-engine riders with 28-inch decks. Verify your deck shape (some older Snappers use a different blade offset).

Should You Buy It

Buy this if you own a Snapper 28-inch rear-engine rider and need a reliable, affordable aftermarket blade that matches OEM specs. It’s a good choice for budget-conscious homeowners who don’t mind sharpening and balancing. Skip it if you want a factory Snapper blade or have a different deck size.