Stens Deck Wheel Kit Compatible with/Replacement For John Deere F710, F725, F735 front mowers, 325, 335, 345 garden tractors AM115488

What It Is

This Stens deck wheel kit is a direct replacement for the OEM John Deere AM115488 anti-scalp wheel assembly. It’s designed for front-mount mowers (F710, F725, F735) and select garden tractors (325, 335, 345) to prevent the deck from scalping uneven terrain.

Fitment & Compatibility

Before buying, verify these three things:

• Deck size: Fits 48-inch and 54-inch decks on the listed models. Not for 42-inch or 60-inch decks without adapter brackets.
• OEM number: Cross-reference your old wheel bracket with AM115488. Stens part number is 215-997 (kit includes two wheels and hardware).
• Measurements: Wheel diameter is 4 inches, width is 1.5 inches, axle hole is 5/16-inch. Bracket offset is 1.5 inches from mounting surface to wheel center. Measure your existing bracket to confirm.
• Hardware: Kit includes bolts, lock washers, and flat washers (M8 x 20mm). Check if your deck uses different thread pitch or length—some early 325/335 models may require longer bolts.

Key Things to Know

• Quality: Stens uses a hardened steel bracket and a solid rubber tire (no air). The bearing is a sealed ball bearing—holds up better than OEM plastic bushings on rough ground.
• Installation: Moderate difficulty. You’ll need a 10mm socket and a pry bar to lift the deck. The old bracket bolts may be rusted—soak with penetrating oil before removal. Expect 20-30 minutes per wheel.
• Common gotcha: The bracket is handed (left vs right). The kit includes one of each, but verify orientation before tightening. Installing backwards will cause the wheel to hit the deck shell.
• Durability: The tire is non-marking and UV-resistant, but the bracket will eventually bend if you hit curbs repeatedly. It’s a wear item—replace in pairs.

Should You Buy It

If you own a John Deere F700-series or 300-series garden tractor with a 48- or 54-inch deck and need to replace worn or missing anti-scalp wheels, this Stens kit is a solid, cost-effective choice. It’s about half the price of the OEM John Deere part and uses better bearings. Skip it if your deck is a different size or you need the older AM104522 bracket style.