Steering Wheel 60069D Fits Farmall A B C Fits Cub Fits Cub LoBoy 46512DA

What It Is

The Steering Wheel 60069D is an aftermarket replacement steering wheel designed for vintage International Harvester (IH) tractors, specifically the Farmall A, B, C, Cub, and Cub LoBoy models. It replicates the original steering wheel used for steering control and operator comfort on these classic garden and row-crop tractors.

Fitment & Compatibility

Before buying, verify your tractor model and steering shaft size. This wheel fits Farmall A, B, C, Cub, and Cub LoBoy (models 46512DA and similar). Check that the steering shaft diameter matches—typically 5/8" or 3/4" on these models. Measure the hub center hole and spline pattern if possible. This is an aftermarket part, not OEM; it may differ slightly in material or finish. Confirm your tractor uses a standard keyed or splined shaft (most Cub and LoBoy use a splined shaft, but some early models differ). No deck size or mower attachment compatibility is relevant here—this is a steering component only.

Key Things to Know

• Quality: Made from molded plastic or rubber over a steel core—durable but not as heavy as original metal wheels. Some users report slight wobble if hub isn’t perfectly centered.
• Installation: Moderate difficulty. You’ll need to remove the old wheel with a puller (don’t hammer it off), clean the shaft, and align the splines/keyway. Tighten the center nut to spec (usually 30-40 ft-lbs). No wiring or special tools required.
• Gotchas: The wheel may sit slightly higher or lower than OEM, affecting your driving position. If your shaft is rusted or worn, the new wheel may not fit snugly. Check for a missing or damaged keyway—you may need to file it.
• Compatibility note: Not guaranteed for Farmall Super A, 100, 130, or 140 models—those use a different steering wheel design.

Should You Buy It

If you own a Farmall A, B, C, Cub, or Cub LoBoy with a worn, cracked, or missing steering wheel, this is a solid, cost-effective replacement. It’s not an exact OEM replica, but it’s functional and easy to install with basic tools. Avoid it if you need a perfect restoration match or have a non-standard steering shaft.