Steering Spindle Kit Bushing fits Husqvarna Craftsman 532169840 532169839 9040H

What It Is

This steering spindle kit bushing is a replacement part for the front axle steering spindles on select Husqvarna and Craftsman lawn tractors. It restores proper steering pivot movement when the original bushings wear out, causing slop or hard turning.

Fitment & Compatibility

Check these before buying:

• Model numbers: Fits Husqvarna models like 9040H and Craftsman equivalents that use OEM part numbers 532169840 (bushing) and 532169839 (spacer). Verify your tractor’s model number against these part numbers.
• Deck size: Not deck-specific—this is a front axle steering component, not a deck spindle. Works across 42", 46", and 54" decks on compatible tractors.
• OEM vs aftermarket: This is an aftermarket replacement. OEM Husqvarna/Craftsman parts are identical in function but cost more. Check that the bushing inner diameter matches your spindle shaft (typically 5/8" or 3/4").
• Measurements: The bushing is roughly 1" tall with a 1" outer diameter. If your old bushing is visibly different, measure before buying.

Key Things to Know

• Quality: Aftermarket bushings are often made of oil-impregnated bronze or hard nylon. They last as long as OEM if installed correctly. Avoid cheap plastic versions.
• Installation difficulty: Moderate. Requires lifting the front of the tractor, removing the front wheels, and pressing out old bushings. A small press or hammer and socket can work—grease the new bushing before pressing.
• Common gotchas: The bushing and spacer (532169839) are often sold separately. This kit includes both, but confirm. If your spindle shaft is rusted or bent, replace the spindle too—bushings alone won’t fix that.
• Steering slop fix: Worn bushings cause side-to-side play in the steering wheel. If you have up-and-down play, the issue is likely the steering gear or sector, not these bushings.

Should You Buy It

If your Husqvarna or Craftsman lawn tractor has loose steering that wobbles side to side, and you’ve ruled out tie rod ends and steering gears, this kit is the right fix. It’s a solid value at $37.99 with good reviews—just verify your model uses these specific part numbers before ordering.