SPF Lawn Mower Tractor Deck Belt 5/8" x 75" Replacement for Wright Mfg. 71460062

What It Is

This is a 5/8-inch wide, 75-inch long replacement deck belt for Wright Mfg. zero-turn mowers. It drives the blades on 52-inch and 61-inch Stander models, directly replacing OEM part 71460062.

Fitment & Compatibility

Before buying, verify three things: belt width (5/8"), length (75"), and your mower model. This belt fits Wright Stander ZK, ZL, and ZT series with 52" or 61" decks. It does not fit 48" or 36" decks. Check your owner’s manual or the old belt for part number 71460062. Aftermarket belts like this one often match OEM specs but may vary slightly in material or construction. Measure your old belt end-to-end (not looped) to confirm 75 inches.

Key Things to Know

• Quality: SPF belts are budget-friendly but may wear faster than OEM. For occasional use, they’re fine; for heavy commercial mowing, expect shorter life.
• Installation difficulty: Moderate. You’ll need to remove the deck, release tension from the idler pulley, and route the belt per the diagram. Take photos before removing the old belt.
• Common gotcha: This belt is for the deck only, not the drive or hydro pump. Don’t confuse it with the 1/2" or 3/8" belts on your machine.
• Check pulley condition: Worn or sticky pulleys will shred any belt quickly. Inspect and replace if needed.

Should You Buy It

If you own a Wright Stander with a 52" or 61" deck and need a budget-friendly replacement for light-to-moderate use, this belt works. For daily commercial mowing or high-torque conditions, stick with the OEM Wright belt for better durability.