Snapper 7104196Bmyp - Blade 28 High Lift 7104196BMYP

What It Is

The Snapper 7104196BMYP is a 28-inch high-lift blade designed for Snapper lawn tractors and zero-turn mowers. It creates strong upward airflow to lift grass for a cleaner cut and better bagging performance, especially in tall or damp conditions.

Fitment & Compatibility

Before buying, verify these three things:

• Deck size: This blade fits 28-inch cutting decks only. Measure your deck width if unsure.
• Model/Brand fit: Listed for Snapper models including LT, ZTR, and some Murray/AGCO units. Check your mower’s manual or existing blade part number (often stamped on the blade). Common compatible models: Snapper 2813, 2815, 3314, 3315, and ZTR 2800 series.
• OEM vs aftermarket: This is an OEM Snapper part (7104196BMYP). Aftermarket equivalents exist but may differ in thickness, balance, or hole pattern.
• Measurements: Blade length 28 inches, center hole 5/8 inch, offset 1 inch, thickness about 0.1875 inches. Confirm your spindle hole and offset match.

Quick check: Remove one existing blade and compare length, hole size, and offset visually. If your blade has a different part number (e.g., 7104196 or 7104196SM), this replacement is likely correct.

Key Things to Know

• Quality: OEM Snapper steel with heat-treated edge. Holds an edge well, but high-lift blades dull faster than standard or mulching blades in sandy or gritty grass.
• Installation difficulty: Moderate. You’ll need a socket wrench, torque wrench (recommended 70-90 ft-lbs), and likely a blade removal tool or block of wood to prevent spinning. Always disconnect the spark plug first.
• Common gotcha: High-lift blades increase engine load and can throw debris. Not ideal for dry, dusty conditions or if you frequently mow over rocks/gravel. They also require more horsepower—check your mower’s engine rating (typically 15+ HP for 28-inch decks).
• Balance: New blades are balanced from factory. If you sharpen them, rebalance to avoid vibration that damages spindles.

Should You Buy It

Buy this blade if you have a Snapper 28-inch deck and prioritize superior bagging performance, especially with thick or wet grass. It’s a solid OEM choice for replacement, but skip it if you mainly mulch or mow in dry, dusty conditions—a standard or mulching blade will last longer and reduce wear on your mower.