Snapper 22" Push Mower Blade 7100851 #2006

What It Is

This is a replacement blade for Snapper 22-inch push mowers, designed to cut grass efficiently on residential lawns. It’s a direct OEM part (model 7100851, #2006) for Snapper models with a 22-inch stamped steel deck.

Fitment & Compatibility

Before buying, confirm your mower’s deck size is exactly 22 inches. This blade fits Snapper 22” push mowers with a 6.5-7.5 ft-lb torque rating and a 1-inch center hole with a 5-point star drive. It does NOT fit universal or off-brand decks—check your mower’s model number (e.g., P21600 series) against Snapper’s compatibility list. Measure your old blade’s length (22 inches end-to-end) and center hole pattern to avoid mismatch. OEM-only fit; aftermarket versions may vary in thickness or balance.

Key Things to Buy

• Quality & Durability: OEM Snapper steel with heat-treated edge; holds sharpness longer than cheap aftermarket blades. Expect ~20-30 hours of cut time before dulling.
• Installation Difficulty: Moderate—requires a socket wrench (typically 5/8” or 3/4” bolt) and a blade removal tool. Torque to 30-40 ft-lbs; over-tightening can strip the star drive. Use thread locker if vibration loosens it.
• Common Gotchas: Star drive pattern is proprietary—non-OEM blades with a round hole won’t lock onto the drive pulley. Always replace the blade bolt if worn. Check for bent deck or unbalanced blade after installation (vibration indicates imbalance).
• Performance: Lift and cut are optimized for Snapper’s deck design; mulching or bagging may require a different blade (e.g., high-lift for bagging).

Should You Buy It

If you own a Snapper 22-inch push mower and want a reliable, OEM-spec blade that fits without modification, this is the right choice. It’s priced fairly for the quality, but if you’re on a tight budget or need a universal blade for a different brand, look elsewhere.