(Single) 20x10.00-8 Tires & Wheels 2 Ply for Lawn & Garden Mower Turf Tires

What It Is

This is a single 20x10.00-8 turf tire and wheel assembly designed for lawn and garden mowers, zero-turns, and garden tractors. It provides smooth, low-compaction rolling on grass and light-duty surfaces.

Fitment & Compatibility

Before buying, verify these four measurements:

• Tire size: Must be exactly 20x10.00-8 (20" outer diameter, 10" width, 8" rim).
• Bolt pattern: Check your mower’s wheel bolt pattern (commonly 4 on 4", 4 on 5.5", or 5 on 4.5"). Measure center-to-center of opposite bolts.
• Center hole diameter: Ensure it matches your axle hub (typically 3/4" to 1").
• Offset: Confirm wheel offset (distance from mounting face to tire centerline) matches your mower to avoid rubbing or poor steering.

This is an aftermarket part; compare to your OEM wheel’s offset and bolt pattern. Not for heavy-duty or off-road use.

Key Things to Know

• 2-ply rating: Light-duty for turf; not for rocky or rough terrain. Expect less puncture resistance than 4- or 6-ply.
• Installation: Usually bolt-on, but you may need to reuse your original lug nuts or valve stem caps. Check lug nut thread size (often 1/2"-20 or 5/8"-18).
• Common gotcha: The tire may be slightly under-inflated from shipping; inflate to 14-18 PSI for proper ride and wear.
• Quality: Budget-friendly option. Tread pattern is standard turf; good for flat, maintained lawns.

Should You Buy It

Buy this if you need a direct replacement for a worn or damaged 20x10.00-8 turf tire on a residential mower, and you’ve confirmed your bolt pattern and offset. It’s a solid value for light-duty use, but skip it if you need heavy-duty puncture resistance or an exact OEM match.