Set of 6 New Mower Blades Fits Ferris, Simplicity, Snapper Pro Requires 3 for 61" Deck, S125XT, S175X, S200XT Models Interchangeable with 14539, 315-872, 315-872-A, 5101755, 5101755S, 5101755S-

What It Is

This is a set of six replacement mower blades designed for Ferris, Simplicity, and Snapper Pro zero-turn mowers with a 61-inch deck. They require three blades per deck, making this set enough for two full replacements.

Fitment & Compatibility

Before buying, verify your mower has a 61-inch deck and requires three blades (not two, as some decks do). This set fits Ferris S125XT, S175X, S200XT models, plus compatible Simplicity and Snapper Pro units. Cross-reference with OEM part numbers 14539, 315-872, 315-872-A, 5101755, 5101755S, and 5101755S-. Measure your current blades: length should be approximately 20.5 inches, with a center hole diameter of about 0.75 inches and a 5-point star drive pattern. If your blades differ, these won’t fit.

Key Things to Know

• Quality: These are aftermarket blades, not OEM Snapper, but rated 5.0/5 from 17 reviews—suggesting good durability and sharpness for residential/commercial use.
• Installation: Moderate difficulty. You’ll need a torque wrench and a blade removal tool. Tighten to 70-90 ft-lbs. Always disconnect the spark plug and use jack stands.
• Common Gotcha: These blades are sold as a set of six, but only three are needed per deck. The second set is a spare—don’t install all six at once. Also, ensure your deck is level after installation to avoid uneven cut.
• Balance: Some aftermarket blades may need balancing before install. Check with a blade balancer for vibration-free operation.

Should You Buy It

Buy this set if you own a Ferris, Simplicity, or Snapper Pro with a 61-inch deck and want a cost-effective replacement for OEM blades. The high rating and two-set value make it a solid choice for regular maintenance, but only if you verify your model and blade measurements match.