Set of 2 Lawn Mower Rear Drive Wheels Compatible with HRR216 HRS216 HRT216 Walk Behind Lawn Mower - Replaces 42710-VE2-M02ZE 42710-VE2-M00ZE 42710-VE2-M01ZE 42710-VG3-B00

What It Is

This is a set of two rear drive wheels designed for Honda HRR216, HRS216, and HRT216 walk-behind mowers. They replace the OEM wheels that drive the self-propel system, restoring traction and mobility on worn-out originals.

Fitment & Compatibility

• Exact models: Honda HRR216 (all variants), HRS216, HRT216 series. Check your model number on the mower’s deck or frame sticker.
• OEM part numbers confirmed: 42710-VE2-M02ZE, 42710-VE2-M00ZE, 42710-VE2-M01ZE, 42710-VG3-B00.
• Measurements: Wheel diameter is approximately 8 inches; axle hole is 5/8 inch. Verify your current wheel diameter and axle size before buying.
• Aftermarket set: Not OEM Honda, but designed as a direct replacement. If your mower uses a different wheel design (e.g., front wheels only, or non-Honda models), these won’t fit.
• Deck size irrelevant: These are drive wheels—fit is based on axle, not cutting width.

Key Things to Know

• Build quality: Users report solid plastic construction, but not as durable as OEM Honda wheels. Expect 1-2 seasons under normal use.
• Installation: Requires removing a single cotter pin or retaining clip per wheel. No special tools needed; difficulty is low.
• Common gotcha: The drive pin (key) inside the wheel hub may not align perfectly with all mower axles. If your mower uses a different pin design, you may need to file or replace the pin.
• Traction: Tread pattern is similar to OEM, but grip on wet grass is slightly less than factory wheels. Good for dry conditions.

Should You Buy It

Yes, if you need a budget-friendly replacement for worn rear wheels on a compatible Honda HRR/HRS/HRT mower and don’t mind slightly lower durability than OEM. Skip if you want original Honda parts for heavy commercial use or have a non-Honda model.