(Set of 2) 20x8.00-8 Lawn & Garden Mower Turf Tires - 4 Ply with Keyed Hub Wheel | Compatible with Husqvarna & Some Craftsman Models

What It Is

This is a set of two 20x8.00-8 turf tires mounted on keyed hub wheels, designed for zero-turn mowers, lawn tractors, and garden tractors. They’re ideal for residential mowing on flat to gently sloping turf, offering low ground pressure to minimize lawn damage.

Fitment & Compatibility

Before buying, confirm these three things:

• Tire size: Must be 20x8.00-8 (20-inch diameter, 8-inch width, 8-inch rim). Check your current tire sidewall for this exact size.
• Hub type: These have a keyed hub (a slot for a key that locks onto the axle). Most Husqvarna and some Craftsman models use this, but many newer Craftsman models use a pin-drive hub instead. Measure your axle diameter (common sizes: 3/4” or 5/8”) and verify the hub keyway matches.
• Bolt pattern & offset: Measure your wheel bolt pattern (typically 4 on 4” or 4 on 5.5”) and compare to these wheels. Also check the wheel offset (distance from mounting face to centerline) to avoid rubbing against the frame or deck.

This is an aftermarket replacement, not OEM. It fits many Husqvarna zero-turns (e.g., Z242F, Z254) and some Craftsman models (e.g., T225, T250), but not all. Check your model’s parts diagram or measure your existing wheel/hub setup.

Key Things to Know

• 4-ply rating: Good for residential use, but not for heavy commercial loads or rocky terrain. Sidewalls are softer to protect turf.
• Installation: Moderate difficulty. You’ll need a socket set and possibly a breaker bar. No special tire mounting—wheels come pre-assembled.
• Common gotcha: The keyed hub may not fit if your axle uses a pin or shear bolt. Also, these are tubeless tires; ensure your rims seal properly to avoid slow leaks.
• Weight: Each tire/wheel combo is ~15 lbs. Heavier than some OEM options, which may affect mower balance slightly.

Should You Buy It

Buy these if you have a Husqvarna or older Craftsman zero-turn with a keyed axle, want a durable turf tire upgrade, and don’t mind verifying fitment manually. Skip them if your mower uses a pin-drive hub or you need a heavier-duty tire for rough, rocky ground.