Scag ELIM-61 Set of 3 (483318)- Eliminator Blades

What It Is

This is a set of three OEM Scag Eliminator blades (part number 483318) designed for 61-inch commercial zero-turn mowers. They’re the factory-recommended blades for Scag’s high-end mowers, optimized for fine cutting and bagging on large turf areas.

Fitment & Compatibility

Before buying, verify three things:

• Deck size: These blades fit only 61-inch Scag mower decks. Measure your deck or check the manual—do not use on 52-inch or 72-inch decks.
• Model range: Fits most Scag Turf Tiger, Cheetah, and V-Ride models with 61-inch decks built after 2005. Check your model’s parts diagram for 483318 compatibility.
• Blade dimensions: Each blade is approximately 20.5 inches long, with a 1-inch center hole and 0.25-inch thickness. Confirm your spindle mount matches (most Scag spindles use a 5-point star pattern, but some older models use a different hole pattern).
• OEM vs aftermarket: These are genuine Scag blades, not generic replacements. If you’ve used aftermarket blades in the past, note that OEM blades often have different heat treatment and balance specs.

Key Things to Know

• Quality: These blades are heat-treated for durability and hold an edge well in grass, but they dull faster than standard mulching blades if you hit sand or gravel. Expect to sharpen every 8–10 hours of heavy use.
• Installation difficulty: Moderate. You’ll need a torque wrench (spec is 70–90 ft-lbs) and a blade removal tool. The blades are heavy and sharp—wear gloves and eye protection. Always remove the spark plug wire before working.
• Common gotcha: The blades come as a set of three, but they are not interchangeable left-to-right. The outer two blades have a slight pitch difference from the center blade. Mark them during removal to avoid re-installation errors.
• Balance: These are pre-balanced from the factory, but it’s good practice to check balance on a blade balancer after sharpening. An unbalanced blade causes vibration and spindle wear.

Should You Buy It

Buy this set if you own a 61-inch Scag commercial mower and want factory-grade cut quality and durability for large, flat lawns. It’s the right choice for operators who mow fine turf (like golf courses or sports fields) and need consistent, clean cuts. Skip it if you mow rough terrain or want cheaper aftermarket alternatives—these are premium blades at a premium price.