RONPOW 11x4.00-5 Lawn Mower Tires Flat Free and Wheel, 11x4-5 Solid Front Tires for Zero Turn Mower, 350Lbs Load, 3/4", 5/8" and 1/2" Bearings, 3.4"-5.8" Hub for Residential Commercial, 2Pack Yellow

What It Is

The RONPOW 11x4.00-5 flat-free tires are solid, puncture-proof replacements for zero-turn mower front wheels, supporting up to 350 lbs per tire. They eliminate flats and are ideal for residential and light commercial mowing on paved or uneven terrain.

Fitment & Compatibility

Before buying, measure your existing tire size (must be 11x4.00-5) and check your hub’s bearing bore. This wheel comes with three bearing options: 3/4", 5/8", and 1/2" – select the one matching your axle. Also measure hub width: it ranges from 3.4" to 5.8" (verify your mower’s hub width falls within this range). Common compatible zero-turn brands include Hustler, Spartan, Gravely, Toro, and Bad Boy, but confirm your model’s front wheel specs (especially axle diameter and hub width) since not all models use the same bearing or offset. For best fit, consult your mower’s manual or measure original wheel hub width and axle diameter.

Key Things to Know

• No air needed – These are solid foam, so they won’t go flat, but they ride slightly stiffer than pneumatic tires, especially on rough ground.
• Bearing kit included – The package contains three bearing sizes; install the correct one for your axle (don’t force a wrong size). Use included spacer washers if your axle is narrower than the hub.
• Installation is straightforward – No special tools required, but you may need a socket or wrench for the axle nut. Takes about 10–15 minutes per wheel.
• Weight and load – Each wheel carries up to 350 lbs, so they’re fine for most residential zero-turns, but not for heavy commercial zero-turns with front-end loads exceeding that per wheel.

Should You Buy It

If you’re tired of fixing flat front tires on your zero-turn mower and want a durable, no-maintenance solution for residential or light commercial use, this RONPOW 2-pack offers excellent value. Just verify your axle size and hub width beforehand, and you’ll get a solid upgrade that saves time and hassle.